Warm deep drawing of magnesium alloy sheets - formability and process conditions
文献类型：期刊论文
| 作者 | L. M. Ren ; S. H. Zhang ; G. Palumbo ; L. Tricarico |
| 刊名 | Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture
 |
| 出版日期 | 2008 |
| 卷号 | 222期号:11页码:1347-1354 |
| 关键词 | magnesium alloy warm deep drawing rectangular cup formability fracture elevated-temperatures flow-stress room-temperature az31 sheets |
| ISSN号 | 0954-4054 |
| 中文摘要 | The influence of deformation conditions on the formability of magnesium alloy was systematically investigated using the experimental method and finite element analysis. The research activity aimed to gain further insight into the formability of magnesium alloy AZ31 (aluminium 3 wt per cent, zinc 1 wt per cent) and to have first-hand knowledge of the correlations between the material's properties and the processing parameters. In this work, the mechanical properties of magnesium alloy AZ31 sheet were analysed according to the results of tensile tests. A set of experimental equipment with temperature control was employed to perform warm deep drawing of magnesium alloy AZ31 sheets under various forming conditions. The most important process parameters, including the punch speed, the forming temperature, and the geometrical shape of the blank, were taken into account and optimal values were proposed. Finite element analyses were also performed to evaluate the effects of the process parameters on the formability of rectangular cup drawing and to predict the process defects during the process. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/33059]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | L. M. Ren,S. H. Zhang,G. Palumbo,et al. Warm deep drawing of magnesium alloy sheets - formability and process conditions[J]. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture,2008,222(11):1347-1354. |
| APA | L. M. Ren,S. H. Zhang,G. Palumbo,&L. Tricarico.(2008).Warm deep drawing of magnesium alloy sheets - formability and process conditions.Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture,222(11),1347-1354. |
| MLA | L. M. Ren,et al."Warm deep drawing of magnesium alloy sheets - formability and process conditions".Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 222.11(2008):1347-1354. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。