Evaluation of the elastic modulus and strength of unsymmetrical Al2O3 coating on Ti3SiC2 substrate by a modified relative methodology
文献类型：期刊论文
| 作者 | D. T. Wan ; Y. C. Zhou ; Y. W. Bao |
| 刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
 |
| 出版日期 | 2008 |
| 卷号 | 474期号:1-2页码:64-70 |
| 关键词 | relative method elastic modulus strength Ti3SiC2 Al2O3 high-temperature residual-stress bulk ceramics indentation composites damage behavior hardness phases |
| ISSN号 | 0921-5093 |
| 中文摘要 | Putting Ti3SiC2 in sandwich of Al2O3 will produce the hard-soft-hard sandwich composites of Al2O3/Ti3SiC2/Al2O3 with improved oxidation resistance and high hardness. The relative method has been established to evaluate the elastic modulus and strength of the symmetrical coating. However, it is difficult to make the thickness of the Al2O3 coatings on both sides exactly the same during the synthesis process and this results in deviation inevitably. It is significant to develop a modified relative method to suit for the unsymmetrical coated sandwich samples. In this work, the sandwich composites of Al2O3/Ti3SiC2/Al2O3 with strong interfaces were prepared by in situ hot pressing process and a modified relative method was derived for determining the elastic modulus and strength of the Al2O3 coating. Experimental results revealed that the modulus and strength of Al2O3 were 398.2 GPa and 313.2 MPa, respectively, which demonstrated the validity and convenience of the modified relative method. The mechanism for the strong interface between Ti3SiC2 and Al2O3 was also discussed. (C) 2007 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/33112]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | D. T. Wan,Y. C. Zhou,Y. W. Bao. Evaluation of the elastic modulus and strength of unsymmetrical Al2O3 coating on Ti3SiC2 substrate by a modified relative methodology[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2008,474(1-2):64-70. |
| APA | D. T. Wan,Y. C. Zhou,&Y. W. Bao.(2008).Evaluation of the elastic modulus and strength of unsymmetrical Al2O3 coating on Ti3SiC2 substrate by a modified relative methodology.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,474(1-2),64-70. |
| MLA | D. T. Wan,et al."Evaluation of the elastic modulus and strength of unsymmetrical Al2O3 coating on Ti3SiC2 substrate by a modified relative methodology".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 474.1-2(2008):64-70. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。