Ti (Zr)-Cu-Ni Bulk Metallic Glasses with Optimal Glass-Forming Ability and Their Compressive Properties
文献类型:期刊论文
作者 | Y. L. Wang ; J. Xu |
刊名 | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science
![]() |
出版日期 | 2008 |
卷号 | 39A期号:12页码:2990-2997 |
关键词 | supercooled liquid region mg-cu-y mechanical-properties amorphous-alloys critical diameter ni plasticity ductility strength sn |
ISSN号 | 1073-5623 |
中文摘要 | The formation of bulk metallic glasses (BMGs) was systematically investigated in the ternary Ti-Cu-Ni and quaternary Ti-Zr-Cu-Ni systems. Over a relatively wide composition range (50 to 57 at. pct Ti, 34 to 44 at. pct Cu, and 6 to 10 at. pct Ni) in the ternary Ti-Cu-Ni system, new Ti-based BMGs with a critical diameter of 1 mm have been discovered in the triangular region enclosed by the three intermetallic compounds TiNi, TiCu, and Ti(2)Cu. Partial substitution of Zr for Ti improved the glass-forming ability (GFA), and the BMGs of 3 mm in diameter were obtained in the composition range of 51 to 53 at. pct (Ti + Zr), 38 to 41 at. pct Cu, and 8 to 10 at. pct Ni. The enhanced GFA compared with the ternary Ti-Ni-Cu system was attributed to the effects of Zr on stabilizing the undercooled liquid. These Ti-based BMGs had compressive fracture strength higher than 2 GPa. Among them, the Ti(50)Cu(43)Ni(7) glass exhibited a reproducible plastic strain larger than 5 pct. |
原文出处 | |
公开日期 | 2012-04-13 |
源URL | [http://210.72.142.130/handle/321006/33168] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Y. L. Wang,J. Xu. Ti (Zr)-Cu-Ni Bulk Metallic Glasses with Optimal Glass-Forming Ability and Their Compressive Properties[J]. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science,2008,39A(12):2990-2997. |
APA | Y. L. Wang,&J. Xu.(2008).Ti (Zr)-Cu-Ni Bulk Metallic Glasses with Optimal Glass-Forming Ability and Their Compressive Properties.Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science,39A(12),2990-2997. |
MLA | Y. L. Wang,et al."Ti (Zr)-Cu-Ni Bulk Metallic Glasses with Optimal Glass-Forming Ability and Their Compressive Properties".Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 39A.12(2008):2990-2997. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。