Improving the surface hardness and wear resistance of Ti3SiC2 by boronizing treatment
文献类型：期刊论文
| 作者 | C. Li ; M. S. Li ; Y. C. Zhou |
| 刊名 | Surface & Coatings Technology
 |
| 出版日期 | 2007 |
| 卷号 | 201期号:12页码:6005-6011 |
| 关键词 | boronizing Ti3SiC2 diffusion coatings hardness wear resistance titanium-silicon carbide coatings composites friction |
| ISSN号 | 0257-8972 |
| 中文摘要 | In order to modify surface properties of Ti3SiC2, boronizing was carried out through powder pack cementation in the 1100-1400 degrees C temperature range. After boronizing treatment, one mixture layer, composed of TiB2 and beta-SiC, forms on the surface of Ti3SiC2. The growth of the coating is processed by inward diffusion of boron and obeys a linear rule. The boronizing increases the hardness of Ti3SiC2 from 3.7 GPa to a maximal 9.3 GPa and also significantly improves its wear resistance. (c) 2006 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/33623]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | C. Li,M. S. Li,Y. C. Zhou. Improving the surface hardness and wear resistance of Ti3SiC2 by boronizing treatment[J]. Surface & Coatings Technology,2007,201(12):6005-6011. |
| APA | C. Li,M. S. Li,&Y. C. Zhou.(2007).Improving the surface hardness and wear resistance of Ti3SiC2 by boronizing treatment.Surface & Coatings Technology,201(12),6005-6011. |
| MLA | C. Li,et al."Improving the surface hardness and wear resistance of Ti3SiC2 by boronizing treatment".Surface & Coatings Technology 201.12(2007):6005-6011. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。