Ablation behaviors of ultra-high temperature ceramic composites
文献类型：期刊论文
| 作者 | S. F. Tang ; J. Y. Deng ; S. J. Wang ; W. C. Liu ; K. Yang |
| 刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
 |
| 出版日期 | 2007 |
| 卷号 | 465期号:1-2页码:40915 |
| 关键词 | C/C composites ultra-high temperature ceramics ablation oxidation carbon-carbon composites oxidation zrb2 air |
| ISSN号 | 0921-5093 |
| 中文摘要 | In order to improve the oxidation resistance of carbon fibers reinforced carbon matrix composites (C/C and the thermal shock resistance of ultra-high temperature ceramics (UHTCs), large numbers of ZrB, based particles were introduced into CIC composites to fabricate the C/CC UHTC composites by powder infiltration (PI) and isothermal chemical vapor infiltration (ICV1). The effects of UHTC additive, heat flux and ablation time on the ablation behaviors of the C/C-UHTC composites were investigated through exposure to an oxyacetylene torch flame with ultra-high temperature. The ZrB, addition to the C/C pronouncedly improved the ablation resistance of the material under a 3920 kWm(2) heat flux and the C/C-ZrB2 showed a better ablation-resistive property compared to the C/C-4ZrB(2)-ISiC, C/C-2ZrB(2)-ISiC, C/C-2ZrB-ISiC-1HfC and C/C-2ZrB(2)-ISiC-ITaC. With decrease of the heat flux from 3200 to 2380 kW/m(2), the presence of a small amount of SiC in the C/C-ZrB, was found to have a positive role of improving the ablation resistance; the C/C-4ZrB(2)-ISiC exhibited a good ablation-resistive endurance under 2380 kW/m(2). The HfC addition was proved to effectively enhance the ablation property of the C/C-lZrB2-2SiC while the TaC addition severely deteriorated the property. (C) 2007 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/33828]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | S. F. Tang,J. Y. Deng,S. J. Wang,et al. Ablation behaviors of ultra-high temperature ceramic composites[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2007,465(1-2):40915. |
| APA | S. F. Tang,J. Y. Deng,S. J. Wang,W. C. Liu,&K. Yang.(2007).Ablation behaviors of ultra-high temperature ceramic composites.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,465(1-2),40915. |
| MLA | S. F. Tang,et al."Ablation behaviors of ultra-high temperature ceramic composites".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 465.1-2(2007):40915. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。