中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
A new method for precracking beam for fracture toughness experiments

文献类型:期刊论文

作者Y. W. Bao ; Y. C. Zhou
刊名Journal of the American Ceramic Society
出版日期2006
卷号89期号:3页码:1118-1121
关键词brittle materials contact damage ti3sic2 specimens fatigue
ISSN号0002-7820
中文摘要A simple and versatile precracking method using a triangular notch as a crack starter in limited bending was developed, which is suitable for both brittle ceramics and quasi-plastic materials that are difficult to precrack by the conventional bridge-indentation technique. Slow growth of large crack in brittle or quasi-brittle ceramics was controlled and observed in situ in this way. The precracking tests performed on various ceramics exhibited high reliability and feasibility. The precracked specimens were subsequently used to measure the fracture toughness, and the resultant data showed that the fracture toughness determined by using the precracked specimens reflected the minimum value of the toughness measured in single edge-notched beam (SENB) tests.
原文出处://WOS:000236606700058
公开日期2012-04-13
源URL[http://ir.imr.ac.cn/handle/321006/34128]  
专题金属研究所_中国科学院金属研究所
推荐引用方式
GB/T 7714
Y. W. Bao,Y. C. Zhou. A new method for precracking beam for fracture toughness experiments[J]. Journal of the American Ceramic Society,2006,89(3):1118-1121.
APA Y. W. Bao,&Y. C. Zhou.(2006).A new method for precracking beam for fracture toughness experiments.Journal of the American Ceramic Society,89(3),1118-1121.
MLA Y. W. Bao,et al."A new method for precracking beam for fracture toughness experiments".Journal of the American Ceramic Society 89.3(2006):1118-1121.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。