Microstructural changes of Ti-6Al-4V matrix by the incorporation of continuous SiC fibers
文献类型:期刊论文
作者 | Y. C. Fu ; N. L. Shi ; D. Z. Zhang ; R. Yang |
刊名 | Journal of Materials Science & Technology
![]() |
出版日期 | 2006 |
卷号 | 22期号:4页码:452-454 |
关键词 | matrix strengthening Ti-6Al-4V powder SiC fiber metal-matrix composites titanium aluminide composites residual-stresses |
ISSN号 | 1005-0302 |
中文摘要 | In SiC(f)/Ti-6Al-4V composites, the microstructure of the matrix close to the fiber was different from that of the fiber-less material. Microstructure observations show that a layer of fine grains was located adjacent to the fiber, and more dislocations and faults were found. in this region. Higher recrystallization nucleation rate due to the undeformed SiC fiber and thermal residual stress induced during cooling from the fabrication temperature caused the microstructural changes of the matrix. Hardness measurement indicates that the matrix in the fiber neighborhood was strengthened, and the strengthening effect decreased with distance away from the fiber. |
原文出处 | |
公开日期 | 2012-04-13 |
源URL | [http://ir.imr.ac.cn/handle/321006/34208] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Y. C. Fu,N. L. Shi,D. Z. Zhang,et al. Microstructural changes of Ti-6Al-4V matrix by the incorporation of continuous SiC fibers[J]. Journal of Materials Science & Technology,2006,22(4):452-454. |
APA | Y. C. Fu,N. L. Shi,D. Z. Zhang,&R. Yang.(2006).Microstructural changes of Ti-6Al-4V matrix by the incorporation of continuous SiC fibers.Journal of Materials Science & Technology,22(4),452-454. |
MLA | Y. C. Fu,et al."Microstructural changes of Ti-6Al-4V matrix by the incorporation of continuous SiC fibers".Journal of Materials Science & Technology 22.4(2006):452-454. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。