中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler

文献类型:期刊论文

作者S. F. Tang ; J. Y. Deng ; W. C. Liu ; K. Yang
刊名Carbon
出版日期2006
卷号44期号:14页码:2877-2882
关键词carbon/carbon composites chemical vapor infiltration scanning electron microscopy mechanical properties ablation carbon-carbon composites thermal-expansion silicon-carbide oxidation behavior
ISSN号0008-6223
中文摘要In order to improve the mechanical and ablation properties of 2D-carbon/carbon composites, a SiC filler was added to a 2D-preform before isothermal chemical vapor infiltration densification by using a powder infiltration technique. Backscattered electron images showed that the SiC filler was mainly concentrated between the fiber bundles and between the layers. The tensile and flexural strengths of the composites were improved by the addition of the SiC filler because of the increase of interfacial surface areas between the bundles and between the layers, the less residual open porosity, and also the strong bonding between the SiC particles and the pyrocarbon matrix. The composites with filler experienced a 15.2% lower thickness erosion rate and a 51.7% lower mass erosion rate, compared to those C/C without filler. This was attributed to the low oxygen permeability of the SiO2 shielding the exterior inter-bundle pores as well as to a thermal barrier effect. (c) 2006 Elsevier Ltd. All rights reserved.
原文出处://WOS:000241447500002
公开日期2012-04-14
源URL[http://ir.imr.ac.cn/handle/321006/34484]  
专题金属研究所_中国科学院金属研究所
推荐引用方式
GB/T 7714
S. F. Tang,J. Y. Deng,W. C. Liu,et al. Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler[J]. Carbon,2006,44(14):2877-2882.
APA S. F. Tang,J. Y. Deng,W. C. Liu,&K. Yang.(2006).Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler.Carbon,44(14),2877-2882.
MLA S. F. Tang,et al."Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler".Carbon 44.14(2006):2877-2882.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。