Influence of heat treatment on microstructure and mechanical properties of isotropic pyrolytic carbon
文献类型：期刊论文
| 作者 | J. F. Wu ; S. Bai ; H. M. Cheng |
| 刊名 | New Carbon Materials
 |
| 出版日期 | 2006 |
| 卷号 | 21期号:3页码:225-230 |
| 关键词 | isotropic pyrolytic carbon heat treatment microstructure mechanical property raman porosity |
| ISSN号 | 1007-8827 |
| 中文摘要 | The influence of heat treatment on the microstructure and mechanical properties of isotropic pyrolytic carbon prepared by chemical vapor deposition was studied by TEM, SEM, XRD, polarized light metallography, laser Raman spectroscopy, microhardness and three-point bend tests. Results show that the interlayer spacing of the pyrolytic carbon decreases and the crystal size increases with increasing heat treatment temperature. At the same time, the microhardness and the elastic modulus decrease with increasing heat treatment temperature. Heat treatment below 2 400 degrees C has no effect on the flexural strength of the isotropic pyrolytic carbon, but its flexural strength. increases after graphitization at 2 600 degrees C. It is observed that the high temperature heat treatment has changed the pore structure, which consequently influences the mechanical properties. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/34568]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | J. F. Wu,S. Bai,H. M. Cheng. Influence of heat treatment on microstructure and mechanical properties of isotropic pyrolytic carbon[J]. New Carbon Materials,2006,21(3):225-230. |
| APA | J. F. Wu,S. Bai,&H. M. Cheng.(2006).Influence of heat treatment on microstructure and mechanical properties of isotropic pyrolytic carbon.New Carbon Materials,21(3),225-230. |
| MLA | J. F. Wu,et al."Influence of heat treatment on microstructure and mechanical properties of isotropic pyrolytic carbon".New Carbon Materials 21.3(2006):225-230. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。