Fabrication and characterization of large isotropic pyrolytic carbons
文献类型：期刊论文
| 作者 | J. F. Wu ; S. Bai ; S. H. Liu ; H. J. Xu ; H. M. Cheng |
| 刊名 | New Carbon Materials
 |
| 出版日期 | 2006 |
| 卷号 | 21期号:2页码:119-124 |
| 关键词 | pyrolytic carbon isotropic fabrication microstructure deposition |
| ISSN号 | 1007-8827 |
| 中文摘要 | Large isotropic pyrolytic carbon rings were fabricated by a steady fluidized bed deposition apparatus with a rotating substrate. The microstructure of the isotropic pyrolytic carbons obtained was investigated by polarized light microscopy, SEM, TEM and XRD. Their mechanical properties were also studied. Observations using polarized light microscopy and SEM show that the microstructure is homogeneous and there is a small amount of closed porosity inside. TEM observations show that this material is mainly made up of fine turbostratic carbon structures. Mechanical tests show that the Young's modulus, microhardness, flexural strength and compressive strength of the carbons are higher than those of traditional carbon materials. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/34569]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | J. F. Wu,S. Bai,S. H. Liu,et al. Fabrication and characterization of large isotropic pyrolytic carbons[J]. New Carbon Materials,2006,21(2):119-124. |
| APA | J. F. Wu,S. Bai,S. H. Liu,H. J. Xu,&H. M. Cheng.(2006).Fabrication and characterization of large isotropic pyrolytic carbons.New Carbon Materials,21(2),119-124. |
| MLA | J. F. Wu,et al."Fabrication and characterization of large isotropic pyrolytic carbons".New Carbon Materials 21.2(2006):119-124. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。