A study of the process parameters for yttria-stabilized zirconia electrolyte films prepared by screen-printing
文献类型：期刊论文
| 作者 | Y. H. Zhang ; X. Q. Huang ; Z. Lu ; Z. G. Liu ; X. D. Ge ; J. H. Xu ; X. S. Xin ; X. Q. Sha ; W. H. Su |
| 刊名 | Journal of Power Sources
 |
| 出版日期 | 2006 |
| 卷号 | 160期号:2页码:1065-1073 |
| 关键词 | solid oxide fuel cells screen-printing electrolyte films process parameter yttria-stabilized zirconia oxide fuel-cells thin-film reduced-temperature ysz electrolyte sofcs |
| ISSN号 | 0378-7753 |
| 中文摘要 | Screen-printing technology was developed to fabricate gas-tight yttria-stabilized zirconia (YSZ) electrolyte films on porous NiO-YSZ anode substrates for use in solid oxide fuel cells (SOFCs). Several key process parameters such as the starting YSZ powder, printing ink composition, printing time and sintering temperature were studied and reported in detail. SEM results revealed that the selected process parameters exerted obvious influences on the microstructure of the screen-printed YSZ films. Open-circuit voltages (OCVs) were used to evaluate the usage feasibility of screen-printed YSZ films in SOFCs. Cell performance test results showed that the above-mentioned parameters had crucial effects on the OCVs and power density of the prepared cells. Based on appropriate parameters, an OCV value of 1.081 V and a power density of 0.96 Wcm(-2) were obtained at 800 degrees C using hydrogen as fuel and ambient air as oxidant. (c) 2006 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/34723]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Y. H. Zhang,X. Q. Huang,Z. Lu,et al. A study of the process parameters for yttria-stabilized zirconia electrolyte films prepared by screen-printing[J]. Journal of Power Sources,2006,160(2):1065-1073. |
| APA | Y. H. Zhang.,X. Q. Huang.,Z. Lu.,Z. G. Liu.,X. D. Ge.,...&W. H. Su.(2006).A study of the process parameters for yttria-stabilized zirconia electrolyte films prepared by screen-printing.Journal of Power Sources,160(2),1065-1073. |
| MLA | Y. H. Zhang,et al."A study of the process parameters for yttria-stabilized zirconia electrolyte films prepared by screen-printing".Journal of Power Sources 160.2(2006):1065-1073. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。