Preparation of carbon microcoils by catalytic decomposition of acetylene using nickel foam as both catalyst and substrate
文献类型：期刊论文
| 作者 | Y. Chen ; C. Liu ; J. H. Du ; H. M. Cheng |
| 刊名 | Carbon
 |
| 出版日期 | 2005 |
| 卷号 | 43期号:9页码:1874-1878 |
| 关键词 | carbon microcoils pyrolysis electron microscopy chemical-vapor-deposition growth-mechanism fibers pyrolysis coils hydrocarbons morphology |
| ISSN号 | 0008-6223 |
| 中文摘要 | Carbon microcoils (CMCs) were prepared by catalytic pyrolysis of acetylene containing a small amount of thiophene as a promoter at 973-1073 K using nickel foam catalyst which was also used as a substrate, with the CMC yield of about 62% relative to the introduced carbon source. The morphology of the product was observed by scanning electron microscopy (SEM). The morphology of the nickel foam was changed during synthesis, and the sulfur promoter and growth temperature were two important factors influencing the growth of CMCs. (C) 2005 Elsevier Ltd. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/34818]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Y. Chen,C. Liu,J. H. Du,et al. Preparation of carbon microcoils by catalytic decomposition of acetylene using nickel foam as both catalyst and substrate[J]. Carbon,2005,43(9):1874-1878. |
| APA | Y. Chen,C. Liu,J. H. Du,&H. M. Cheng.(2005).Preparation of carbon microcoils by catalytic decomposition of acetylene using nickel foam as both catalyst and substrate.Carbon,43(9),1874-1878. |
| MLA | Y. Chen,et al."Preparation of carbon microcoils by catalytic decomposition of acetylene using nickel foam as both catalyst and substrate".Carbon 43.9(2005):1874-1878. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。