Mechanical properties of DS NiAl/Cr(Mo) alloys with low addition of Hf for high-temperature applications
文献类型:期刊论文
作者 | X. H. Du ; J. T. Guo |
刊名 | Journal of Materials Science & Technology
![]() |
出版日期 | 2005 |
卷号 | 21期号:5页码:635-640 |
关键词 | NiAl / Cr(Mo Hf) alloys microstructure mechanical properties tensile deformation creep behavior in-situ composites plastic-flow properties grain-size creep behavior systems |
ISSN号 | 1005-0302 |
中文摘要 | A multiphase NiAl-28Cr-5.85lVlo-0.15Hf alloy, which was directionally solidified (DS) in an Al2O3-SiO2 mold by standard Bridgman method and then underwent prolonged solution and aging treatment was prepared. The microstructure, tensile properties as well as tensile creep of the heat-treated alloy at different temperatures were studied. The alloy was composed of NiAl, Cr(Mo) and Hf-rich phase and small amount of fine Heusler phase (Ni2AlHf). Although the present alloy exhibited high tensile strength at low temperature, it was weaker than that of system with high content Hf but still stronger than that of many NiAl-based alloys at high temperatures. The fracture toughness is lower than that of DS NiAl-28Cr-6Mo alloy. Nevertheless, advantageous effects on the mechanical properties, i.e. the decrease in brittle-to-ductile transition temperature (BDTT) were obtained for the low content of Hf. The obtained creep curves exhibit conventional shape: a short primary creep and long accelerated creep stages. The rupture properties of the heat-treated alloy follow the Monkman-Grant relationship, which exhibits similar creep behavior to that of NiAl/Cr(Mo) system with high Hf content. |
原文出处 | |
公开日期 | 2012-04-14 |
源URL | [http://ir.imr.ac.cn/handle/321006/34836] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | X. H. Du,J. T. Guo. Mechanical properties of DS NiAl/Cr(Mo) alloys with low addition of Hf for high-temperature applications[J]. Journal of Materials Science & Technology,2005,21(5):635-640. |
APA | X. H. Du,&J. T. Guo.(2005).Mechanical properties of DS NiAl/Cr(Mo) alloys with low addition of Hf for high-temperature applications.Journal of Materials Science & Technology,21(5),635-640. |
MLA | X. H. Du,et al."Mechanical properties of DS NiAl/Cr(Mo) alloys with low addition of Hf for high-temperature applications".Journal of Materials Science & Technology 21.5(2005):635-640. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。