Cyclic deformation and fatigue properties of Al-0.7 wt.% Cu alloy produced by equal channel angular pressing
文献类型：期刊论文
| 作者 | Z. F. Zhang ; S. D. Wu ; Y. J. Li ; S. M. Liu ; Z. G. Wang |
| 刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
 |
| 出版日期 | 2005 |
| 卷号 | 412期号:1-2页码:279-286 |
| 关键词 | equal channel angular pressing (ECAP) Al-0.7 wt.% Cu alloy cyclic softening hysteresis energy density shear bands deformation bands fatigue crack severe plastic-deformation ultrafine-grained metals stress-strain response copper single-crystals behavior bands life evolution |
| ISSN号 | 0921-5093 |
| 中文摘要 | Fatigue damage behavior of an Al-0.7 wt.% Cu alloy, produced by equal channel angular pressing (ECAP) technique, was investigated under constant plastic strain control. It showed that the Al-0.7 wt.% Cu alloy displayed obvious cyclic softening at all the strain amplitudes. The cyclic softening can be attributed to a combination of higher yield strength and hysteresis energy density than the original material. The plastic deformation was carried out by shear bands at low or medium strain ranges, or by both shear bands and coarse deformation bands at high strain ranges. Consequently, fatigue cracks nucleated either along shear bands or along the coarse deformation bands, depending on the applied strain amplitude. (c) 2005 Published by Elsevier B.V. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/35253]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Z. F. Zhang,S. D. Wu,Y. J. Li,et al. Cyclic deformation and fatigue properties of Al-0.7 wt.% Cu alloy produced by equal channel angular pressing[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2005,412(1-2):279-286. |
| APA | Z. F. Zhang,S. D. Wu,Y. J. Li,S. M. Liu,&Z. G. Wang.(2005).Cyclic deformation and fatigue properties of Al-0.7 wt.% Cu alloy produced by equal channel angular pressing.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,412(1-2),279-286. |
| MLA | Z. F. Zhang,et al."Cyclic deformation and fatigue properties of Al-0.7 wt.% Cu alloy produced by equal channel angular pressing".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 412.1-2(2005):279-286. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。