Mechanical properties of a two-phase alloy Mg-8%Li-1%Al processed by equal channel angular pressing
文献类型：期刊论文
| 作者 | T. Liu ; W. Zhang ; S. D. Wu ; C. B. Jiang ; S. X. Li ; Y. B. Xu |
| 刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
 |
| 出版日期 | 2003 |
| 卷号 | 360期号:1-2页码:345-349 |
| 关键词 | equal channel angular pressing mechanical properties magnesium alloy two-phase alloy strength plasticity severe plastic-deformation microstructural evolution magnesium alloys grain-refinement ductility |
| ISSN号 | 0921-5093 |
| 中文摘要 | The microstructural evolution and room temperature tensile properties of Mg-8%Li-1%Al alloy processed by equal channel angular pressing (ECAP) at 403 K were investigated. It was found that the strength could be improved pass by pass. The elongation-to-failure decreased dramatically after the first ECAP pass, but could be improved pass by pass during the subsequent ECAP procedure. The microstructure analysis gave the explanations for these phenomena. (C) 2003 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/35935]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | T. Liu,W. Zhang,S. D. Wu,et al. Mechanical properties of a two-phase alloy Mg-8%Li-1%Al processed by equal channel angular pressing[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2003,360(1-2):345-349. |
| APA | T. Liu,W. Zhang,S. D. Wu,C. B. Jiang,S. X. Li,&Y. B. Xu.(2003).Mechanical properties of a two-phase alloy Mg-8%Li-1%Al processed by equal channel angular pressing.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,360(1-2),345-349. |
| MLA | T. Liu,et al."Mechanical properties of a two-phase alloy Mg-8%Li-1%Al processed by equal channel angular pressing".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 360.1-2(2003):345-349. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。