Effect of curing degree and fillers on slurry erosion behavior of fusion-bonded epoxy powder coatings
文献类型：期刊论文
| 作者 | S. Z. Luo ; Y. G. Zheng ; J. Li ; W. Ke |
| 刊名 | Wear
 |
| 出版日期 | 2003 |
| 卷号 | 254期号:3-4页码:292-297 |
| 关键词 | epoxy powder coating slurry erosion curing degree water absorption glass transition temperature filler resistance |
| ISSN号 | 0043-1648 |
| 中文摘要 | Fusion-bonded epoxy powder (FBEP) coatings are received wide applications in flow-handling components such as pipelines, slurry pumps. There exists a serious problem in above conditions due to slurry erosion. The purpose of this paper is to improve the erosion resistance of FBEP coatings by controlling curing process and composition of coatings. The slurry erosion behavior of FBEP coatings has been studied by using modified rotating disk rig. The surface morphologies were observed by using SEM. The cross-linked density and microstructure were analyzed by measuring curing degree, glass transition temperature (T-g) and water absorption. The results showed that the slurry erosion resistance increased with increasing curing degree. The coating cured at 160degreesC for 60 rain, had more erosion resistance than the coating cured at 220degreesC for 5 min, although the curing degree of the former was same as that of the latter. The characteristics of fillers played an important role in the erosion behavior of FBEP coatings. The erosion resistance increased with the increasing of the fraction and size of fillers. (C) 2003 Elsevier Science B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/35952]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | S. Z. Luo,Y. G. Zheng,J. Li,et al. Effect of curing degree and fillers on slurry erosion behavior of fusion-bonded epoxy powder coatings[J]. Wear,2003,254(3-4):292-297. |
| APA | S. Z. Luo,Y. G. Zheng,J. Li,&W. Ke.(2003).Effect of curing degree and fillers on slurry erosion behavior of fusion-bonded epoxy powder coatings.Wear,254(3-4),292-297. |
| MLA | S. Z. Luo,et al."Effect of curing degree and fillers on slurry erosion behavior of fusion-bonded epoxy powder coatings".Wear 254.3-4(2003):292-297. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。