Study of residual stress in surface nanostructured AISI 316L stainless steel using two mechanical methods
文献类型:期刊论文
作者 | M. Ya ; Y. M. Xing ; F. L. Dai ; K. Lu ; J. Lu |
刊名 | Surface & Coatings Technology
![]() |
出版日期 | 2003 |
卷号 | 168期号:2-3页码:148-155 |
关键词 | nanocrystalline residual stress Moire interferometry hole-drilling moire interferometry nanocrystallization |
ISSN号 | 0257-8972 |
中文摘要 | Ultrasonic mechanical attrition (UMA) treatment can be used to create a nanostructured surface layer that plays a significant role in enhancing the overall strength, stiffness and fatigue life of the treated material. Residual stress can be induced by this process. The residual stress fields are relieved by two mechanical methods i.e. cutting and hole-drilling, and measured using moire interferometry and a method combining moire interferometry and incremental hole-drilling (MIIHD). The experimental results of the two methods correlate well. They show that UMA can cause a high compressive residual stress of up to 531 MPa on the material surface. This helps to prevent cracks from being initiated and propagated on the surface of the material and thus improves its mechanical properties. (C) 2003 Elsevier Science B.V. All ights reserved. |
原文出处 | |
公开日期 | 2012-04-14 |
源URL | [http://ir.imr.ac.cn/handle/321006/36100] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | M. Ya,Y. M. Xing,F. L. Dai,et al. Study of residual stress in surface nanostructured AISI 316L stainless steel using two mechanical methods[J]. Surface & Coatings Technology,2003,168(2-3):148-155. |
APA | M. Ya,Y. M. Xing,F. L. Dai,K. Lu,&J. Lu.(2003).Study of residual stress in surface nanostructured AISI 316L stainless steel using two mechanical methods.Surface & Coatings Technology,168(2-3),148-155. |
MLA | M. Ya,et al."Study of residual stress in surface nanostructured AISI 316L stainless steel using two mechanical methods".Surface & Coatings Technology 168.2-3(2003):148-155. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。