Influence of powder-size matching on the surface quality of ceramic mould shell for investment casting of titanium alloys
文献类型：期刊论文
| 作者 | Q. Jia ; Y. Y. Cui ; R. Yang |
| 刊名 | International Journal of Materials & Product Technology
 |
| 出版日期 | 2001 |
| 页码 | 793-798 |
| 关键词 | compact density viscosity powder-size matching powder/solution ratio mould shell |
| ISSN号 | 0268-1900 |
| 中文摘要 | The main factors determining the surface quality of the ceramic shell mould for investment casting of titanium alloys include the density of the ceramic powder compact and the viscosity of the slurry. In this work, mixtures of fine/coarse powders with different fine powder contents were prepared and their relation to the density of the compact and to the viscosity of the slurry was studied. Variation in viscosity with the powder/solution ratio was also measured for the different powder mixtures. For the given experimental system, the optimal ratio of the fine/coarse powder and the best powder/solution ratio were determined. Examination of the mould shell made under optimized conditions showed that the surface quality of the mould shell was improved significantly. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/36677]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Q. Jia,Y. Y. Cui,R. Yang. Influence of powder-size matching on the surface quality of ceramic mould shell for investment casting of titanium alloys[J]. International Journal of Materials & Product Technology,2001:793-798. |
| APA | Q. Jia,Y. Y. Cui,&R. Yang.(2001).Influence of powder-size matching on the surface quality of ceramic mould shell for investment casting of titanium alloys.International Journal of Materials & Product Technology,793-798. |
| MLA | Q. Jia,et al."Influence of powder-size matching on the surface quality of ceramic mould shell for investment casting of titanium alloys".International Journal of Materials & Product Technology (2001):793-798. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。