Hypereutectic aluminium alloy tubes with graded distribution of Mg2Si particles prepared by centrifugal casting
文献类型:期刊论文
作者 | J. Zhang ; Z. Y. Fan ; Y. Q. Wang ; B. L. Zhou |
刊名 | Materials & Design |
出版日期 | 2000 |
卷号 | 21期号:3页码:149-153 |
ISSN号 | 0261-3069 |
关键词 | Al-Mg2Si centrifugal casting graded distribution composite microstructure solidification fracture strength |
中文摘要 | Hypereutectic Al-Mg,Si alloy tubes were produced by a centrifugal casting process. Primary Mg,Si particles were formed in the tube periphery with graded distribution. Influence of the rotation speed and cooling rate on formation and graded distribution of Mg,Si particles was discussed. It is found that in the outer periphery the particle distribution profile at different rotation speeds is quite different from each other, while it is similar in the inner periphery. Extremely higher cooling rates during centrifugal casting resulted in a better particle distribution gradient and a much finer microstructure in the outer periphery of the tube. (C) 2000 Elsevier Science Ltd. All rights reserved. |
原文出处 | |
公开日期 | 2012-04-14 |
源URL | [http://ir.imr.ac.cn/handle/321006/37246] |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | J. Zhang,Z. Y. Fan,Y. Q. Wang,et al. Hypereutectic aluminium alloy tubes with graded distribution of Mg2Si particles prepared by centrifugal casting[J]. Materials & Design,2000,21(3):149-153. |
APA | J. Zhang,Z. Y. Fan,Y. Q. Wang,&B. L. Zhou.(2000).Hypereutectic aluminium alloy tubes with graded distribution of Mg2Si particles prepared by centrifugal casting.Materials & Design,21(3),149-153. |
MLA | J. Zhang,et al."Hypereutectic aluminium alloy tubes with graded distribution of Mg2Si particles prepared by centrifugal casting".Materials & Design 21.3(2000):149-153. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。