Finite element analysis of stresses associated with transformations in magnesia partially stabilized zirconia
文献类型:期刊论文
作者 | C. R. Chen ; S. X. Li ; Q. Zhang |
刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
![]() |
出版日期 | 1999 |
卷号 | 272期号:2页码:398-409 |
关键词 | finite element analysis transformations magnesia partially stabilized zirconia coherent ti11ni14 precipitate computer-simulation martensitic-transformation tetragonal zirconia microstructural development elastic-constants zro2 ceramics growth alloys |
ISSN号 | 0921-5093 |
中文摘要 | Anisotropy finite element analysis was performed to study stresses associated with the tetragonal precipitates and the tetragonal to monoclinic transformation in MgO partially stabilized zirconia. Stresses were assumed to be caused by the lattice misfits between the product phase and the parent phase. In the finite element calculations, the tetragonal and monoclinic precipitates were assumed to be lenticular in shape, and the anisotropic elastic constants of the cubic, tetragonal and monoclinic phases were considered. The purpose of this paper is to obtain some knowledge about how stresses respond when the microstructure is changed, and how stress fields affect microstructure development. The finite element results show that increasing a,ln, and decreasing c(t)/a(c) can create a favorable stress field to reduce the growth rate of tetragonal precipitates during the heat treatment. Stresses associated with the single tetragonal precipitate in an infinite cubic matrix are distinctly larger than stresses associated with the homogeneously distributed tetragonal precipitates. The twin orientations within the monoclinic particle greatly affect stresses associated with the tetragonal to monoclinic transformation. (C) 1999 Elsevier Science S.A. All rights reserved. |
原文出处 | |
公开日期 | 2012-04-14 |
源URL | [http://ir.imr.ac.cn/handle/321006/37311] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | C. R. Chen,S. X. Li,Q. Zhang. Finite element analysis of stresses associated with transformations in magnesia partially stabilized zirconia[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,1999,272(2):398-409. |
APA | C. R. Chen,S. X. Li,&Q. Zhang.(1999).Finite element analysis of stresses associated with transformations in magnesia partially stabilized zirconia.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,272(2),398-409. |
MLA | C. R. Chen,et al."Finite element analysis of stresses associated with transformations in magnesia partially stabilized zirconia".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 272.2(1999):398-409. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。