Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates - DS Al-SiC/Al4C3 composites
文献类型：期刊论文
| 作者 | S. J. Zhu ; L. M. Peng ; Q. Zhou ; Z. Y. Ma ; K. Kucharova ; J. Cadek |
| 刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
 |
| 出版日期 | 1999 |
| 卷号 | 268期号:1-2页码:236-245 |
| 关键词 | DS SiC AlC composites creep threshold stress stress exponent diffusion control high-temperature creep metal-matrix composites dislocation climb hard particles al composite alloy model |
| ISSN号 | 0921-5093 |
| 中文摘要 | Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates is investigated. For comparison, the results for two dispersion strengthened (DS) AlC alloys denoted DS AlCl and DS AlC2 are presented. (C1 and C2 mean the contents of carbon in wt% which define the volume fractions of Al4C3 particles in DS AIC alloys as well as in SiC/AlC composite matrices). The volume fraction of SiC particulates in composites, denoted SiC/AlCl, SiC/AlC2 and SiC/AlC3, was used to 10 vol.%. The creep in both DS AIC alloys as well as in SiC/AlC composites is associated with relatively high true threshold stress sigma(TH). The linear regression analysis showed that the true stress exponent of minimum creep strain rate of 8 should be preferred to that of 5. The creep strain rate was found to be controlled by lattice diffusion in the matrix metal-aluminium. The creep strength of the SiC/AlC composites increasing with the volume fraction of Al4C3 particles is entirely due to the effect of this fraction on the threshold stress. This is not the case of DS AlC alloys. The difference of the creep strength in SiC/AlC composites and the respective DS AlC alloys could be accounted for by the load transfer effect. The athermal detachment of dislocations from fine Al4C3 (and Al2O3) particles dispersed in the composite matrix is considered as the creep strain rate controlling process. (C) 1999 Published by Elsevier Science S.A. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/37621]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | S. J. Zhu,L. M. Peng,Q. Zhou,et al. Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates - DS Al-SiC/Al4C3 composites[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,1999,268(1-2):236-245. |
| APA | S. J. Zhu,L. M. Peng,Q. Zhou,Z. Y. Ma,K. Kucharova,&J. Cadek.(1999).Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates - DS Al-SiC/Al4C3 composites.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,268(1-2),236-245. |
| MLA | S. J. Zhu,et al."Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates - DS Al-SiC/Al4C3 composites".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 268.1-2(1999):236-245. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。