EFFECTS OF MICROSTRUCTURES ON THE CYCLIC DEFORMATION-BEHAVIOR OF SICW/AL COMPOSITE
文献类型：期刊论文
| 作者 | D. Z. Wang ; J. Liu ; C. K. Yao ; W. C. Yu ; Z. G. Wang |
| 刊名 | Journal of Materials Science
 |
| 出版日期 | 1995 |
| 卷号 | 30期号:13页码:3561-3566 |
| 关键词 | silicon-carbide whisker metal matrix composites sicw/6061al composite |
| ISSN号 | 0022-2461 |
| 中文摘要 | The cyclic deformation behaviour of an aluminium matrix composite reinforced with 16% V-f silicon carbide whiskers was studied. The microstructures were designed so that different precipitates existed in the composite. The results indicated that the SiCw/6061 Al composite demonstrated cyclic hardening, however the cyclic response stresses and the cyclic hardening tendency were different under differing ageing conditions. Lower cyclic response stresses and higher hardening tendencies were found under natural ageing conditions, while higher cyclic response stresses and lower hardening tendencies were obtained under artificial ageing conditions. The higher the cyclic response stresses following artificial ageing, the lower the hardening tendencies that reduced fatigue life. The effects of microstructures on the cyclic deformation behaviour of the composite were examined under the TEM and changes in microstructure caused by the cyclic deformation were observed. |
| 原文出处 | |
| 公开日期 | 2012-04-14 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/38684]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | D. Z. Wang,J. Liu,C. K. Yao,et al. EFFECTS OF MICROSTRUCTURES ON THE CYCLIC DEFORMATION-BEHAVIOR OF SICW/AL COMPOSITE[J]. Journal of Materials Science,1995,30(13):3561-3566. |
| APA | D. Z. Wang,J. Liu,C. K. Yao,W. C. Yu,&Z. G. Wang.(1995).EFFECTS OF MICROSTRUCTURES ON THE CYCLIC DEFORMATION-BEHAVIOR OF SICW/AL COMPOSITE.Journal of Materials Science,30(13),3561-3566. |
| MLA | D. Z. Wang,et al."EFFECTS OF MICROSTRUCTURES ON THE CYCLIC DEFORMATION-BEHAVIOR OF SICW/AL COMPOSITE".Journal of Materials Science 30.13(1995):3561-3566. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。