Investigation of the impact toughness of normal bamboo, reformed bamboo and reformed bamboo composites
文献类型:期刊论文
作者 | Q. Y. Zeng ; Z. T. Tang ; S. H. Li ; B. L. Zhou |
刊名 | Science and Engineering of Composite Materials |
出版日期 | 1995 |
卷号 | 4期号:4页码:255-260 |
ISSN号 | 0334-181X |
关键词 | reformed bamboo impact toughness dynamic fracture |
中文摘要 | The impact toughness of normal bamboo, reformed bamboo and reformed bamboo reinforced composites was studied comparatively by using a computerized Automatic Impact Testing System. It is found that the impact toughness of normal bamboo is dependent on the direction of the impact load. If the impact load is applied in the radial direction of the bamboo culm, the specimen impacted on the pith-ring has a much higher impact toughness than those impacted on the rind side. The impact toughness of reformed bamboo is somewhat lower than that of normal bamboo when most static mechanical properties are increased. The experimental results reveal that one of the technical parameters of reformed bamboo, the compressive ratio, is closely related to its impact toughness. However, the composition of reformed bamboo with glass fabric and aluminum sheets can improve the impact properties of reformed bamboo composites to a satisfactory extent while maintaining the superiority of their static mechanical properties. |
原文出处 | |
公开日期 | 2012-04-14 |
源URL | [http://ir.imr.ac.cn/handle/321006/38744] |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Q. Y. Zeng,Z. T. Tang,S. H. Li,et al. Investigation of the impact toughness of normal bamboo, reformed bamboo and reformed bamboo composites[J]. Science and Engineering of Composite Materials,1995,4(4):255-260. |
APA | Q. Y. Zeng,Z. T. Tang,S. H. Li,&B. L. Zhou.(1995).Investigation of the impact toughness of normal bamboo, reformed bamboo and reformed bamboo composites.Science and Engineering of Composite Materials,4(4),255-260. |
MLA | Q. Y. Zeng,et al."Investigation of the impact toughness of normal bamboo, reformed bamboo and reformed bamboo composites".Science and Engineering of Composite Materials 4.4(1995):255-260. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。