Influence of Epoxy Resin on the Properties of Maleic Anhydride Functionalized Acrylonitrile-Butadiene-Styrene Copolymer Toughened Polyamide 6 Blends
文献类型：期刊论文
| 作者 | Sun SL ; Chen Z ; Sun LL ; Zhang HX |
| 刊名 | journal of applied polymer science
 |
| 出版日期 | 2011 |
| 卷号 | 121期号:2页码:909-915 |
| 关键词 | NYLON 6/ABS BLENDS FRACTURE-BEHAVIOR PBT/ABS BLENDS POLYMER BLENDS COMPATIBILIZER MORPHOLOGY ABS TEREPHTHALATE TEMPERATURE CORE |
| ISSN号 | 0021-8995 |
| 通讯作者 | zhang hx |
| 中文摘要 | maleic anhydride functionalized acrylonitrile-butadiene-styrene copolymer (abs-g-ma) was used as an impact modifier of polyamide 6 (pa6). epoxy resin was introduced into pa6/abs-g-ma blends to further improve their properties. notched izod impact tests showed that the impact strength of pa6/abs-g-ma could be improved from 253 to 800 j/m with the addition of epoxy resin when the abs-g-ma content was set at 25 wt %. differential scanning calorimetry results showed that the addition of epoxy resin made the crystallization temperature and melting temperature shift to lower temperatures; this indicated the decrease in the pa6 crystallization ability. dynamic mechanical analysis testing showed that the addition of epoxy resin induced the glass-transition temperature of pa6 and the styrene-co-acrylonitrile copolymer phase to shift to higher temperatures due to the chemical reactions between pa6, abs-g-ma, and epoxy resin. the scanning electron microscopy results indicated that the abs-g-ma copolymer dispersed into the pa6 matrix uniformly and that the phase morphology of the pa6/abs-g-ma blends did not change with the addition of the epoxy resin. transmission electron microscopy showed that the epoxy resin did not change the deformation mechanisms of the pa6/abs-g-ma blends. (c) 2011 wiley periodicals, inc. j appl polym sci 121: 909-915, 2011 |
| 收录类别 | SCI收录期刊论文 |
| 语种 | 英语 |
| WOS记录号 | WOS:000289355500038 |
| 公开日期 | 2012-06-08 |
| 源URL | [http://ir.ciac.jl.cn/handle/322003/44473]  |
| 专题 | 长春应用化学研究所_长春应用化学研究所知识产出_期刊论文 |
| 推荐引用方式 GB/T 7714 | Sun SL,Chen Z,Sun LL,et al. Influence of Epoxy Resin on the Properties of Maleic Anhydride Functionalized Acrylonitrile-Butadiene-Styrene Copolymer Toughened Polyamide 6 Blends[J]. journal of applied polymer science,2011,121(2):909-915. |
| APA | Sun SL,Chen Z,Sun LL,&Zhang HX.(2011).Influence of Epoxy Resin on the Properties of Maleic Anhydride Functionalized Acrylonitrile-Butadiene-Styrene Copolymer Toughened Polyamide 6 Blends.journal of applied polymer science,121(2),909-915. |
| MLA | Sun SL,et al."Influence of Epoxy Resin on the Properties of Maleic Anhydride Functionalized Acrylonitrile-Butadiene-Styrene Copolymer Toughened Polyamide 6 Blends".journal of applied polymer science 121.2(2011):909-915. |
入库方式： OAI收割
来源：长春应用化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。