DESIGN OF LOW-TIMING-JITTER, STABLE PICOSECOND OPTICAL-PULSE SOURCE USING AN UNCOOLED GAIN-SWITCHED FABRY-PEROT SEMICONDUCTOR LASER WITH EXTERNAL CONTINUOUS-WAVE LIGHT INJECTION
文献类型：期刊论文
| 作者 | Liu, Yuanshan2; Zhang, Jian-Guo1 |
| 刊名 | microwave and optical technology letters
 |
| 出版日期 | 2011-09-01 |
| 卷号 | 53期号:9页码:2100-2105 |
| 关键词 | gain-switched laser low-timing-jitter optical-pulse source picosecond pulse generation uncooled Fabry-Perot laser external light injection operation stability |
| ISSN号 | 0895-2477 |
| 英文摘要 | this paper presents the design of a low-timing-jitter, stable picosecond optical-pulse source, which is based on a low-cost, uncooled fabry-perot (fp) semiconductor laser in the gain-switching operation. the wavelength of the designed laser can be tuned from 1538 to 1554 nm under the condition of external continuous-wave (cw) light injection. the relationship between injection light power and timing jitter or between injection light power and pulse width of this gain-switched laser is studied experimentally. our results show that the optical pulses with widths about 28 and 19 ps at the repetition frequencies of 2.5 and 5 ghz, respectively, are produced by an uncooled gain-switched fp semiconductor laser with timing jitter <= 600 fs, when the injection power and wavelength of an external cw light are appropriately chosen. the use of a 500-m dispersion-compensation fiber can easily compress the optical pulses from 26 to 7.7 ps. moreover, the stability of an uncooled gain-switched fp laser is experimentally investigated, and a stable optical-pulse train at 5 ghz can be feasibly produced over 7 h of continuously working. (c) 2011 wiley periodicals, inc. microwave opt technol lett 53:2100-2105, 2011; view this article online at wileyonlinelibrary.com. doi 10.1002/mop.26176 |
| WOS标题词 | science & technology ; technology ; physical sciences |
| 类目[WOS] | engineering, electrical & electronic ; optics |
| 研究领域[WOS] | engineering ; optics |
| 关键词[WOS] | dfb laser ; signal generation ; diode ; transmission ; amplifier ; systems |
| 收录类别 | SCI ; EI |
| 原文出处 | http://onlinelibrary.wiley.com/doi/10.1002/mop.26176/abstract |
| 语种 | 英语 |
| WOS记录号 | WOS:000292600900041 |
| 公开日期 | 2012-06-29 |
| 源URL | [http://ir.opt.ac.cn/handle/181661/19696]  |
| 专题 | 西安光学精密机械研究所_瞬态光学技术国家重点实验室 |
| 作者单位 | 1.London S Bank Univ, Dept Engn & Design, London SE1 0AA, England 2.Chinese Acad Sci, State Key Lab Transient Opt & Photon, Xian Inst Opt & Precis Mech, Xian 710068, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu, Yuanshan,Zhang, Jian-Guo. DESIGN OF LOW-TIMING-JITTER, STABLE PICOSECOND OPTICAL-PULSE SOURCE USING AN UNCOOLED GAIN-SWITCHED FABRY-PEROT SEMICONDUCTOR LASER WITH EXTERNAL CONTINUOUS-WAVE LIGHT INJECTION[J]. microwave and optical technology letters,2011,53(9):2100-2105. |
| APA | Liu, Yuanshan,&Zhang, Jian-Guo.(2011).DESIGN OF LOW-TIMING-JITTER, STABLE PICOSECOND OPTICAL-PULSE SOURCE USING AN UNCOOLED GAIN-SWITCHED FABRY-PEROT SEMICONDUCTOR LASER WITH EXTERNAL CONTINUOUS-WAVE LIGHT INJECTION.microwave and optical technology letters,53(9),2100-2105. |
| MLA | Liu, Yuanshan,et al."DESIGN OF LOW-TIMING-JITTER, STABLE PICOSECOND OPTICAL-PULSE SOURCE USING AN UNCOOLED GAIN-SWITCHED FABRY-PEROT SEMICONDUCTOR LASER WITH EXTERNAL CONTINUOUS-WAVE LIGHT INJECTION".microwave and optical technology letters 53.9(2011):2100-2105. |
入库方式： OAI收割
来源：西安光学精密机械研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。