A study of Ni3Si-based composite coating fabricated by self-propagating high temperature synthesis casting route
文献类型：期刊论文
| 作者 | Niu MY(牛牧野) ; Liu WM(刘维民); Bi QL(毕秦岭); Bi QL(毕秦岭); Yang J(杨军)
|
| 刊名 | Surface and Coatings Technology
 |
| 出版日期 | 2011 |
| 卷号 | 205页码:4249-4253 |
| 关键词 | SHS Coating Nickel-silicide Wear resistance |
| ISSN号 | 0257-8972 |
| 通讯作者 | 毕秦岭 |
| 中文摘要 | ANi3Si-Cr7C3 composite coating was fabricated on AISI 1020 steel substrate by self-propagating high- temperature synthesis (SHS) casting route. Phase composition, microhardness and dry sliding wear behavior of the coatingwere studied. The results indicated that the coatingwasmainly consisted of Ni3Si and Cr7C3. The microhardness of coating is about 900 HV. The friction and wear tests showed that although the friction coefficient had no obvious change, the wear resistance of the AISI 1020 steel matrix was improved greatly. Also, the corrosion test result showed that the coating had an excellent corrosion resistance. |
| 学科主题 | 材料科学与物理化学 |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000291295200018 |
| 公开日期 | 2012-09-24 |
| 源URL | [http://210.77.64.217/handle/362003/815]  |
| 专题 | 兰州化学物理研究所_固体润滑国家重点实验室 |
| 通讯作者 | Bi QL(毕秦岭); Bi QL(毕秦岭) |
| 推荐引用方式 GB/T 7714 | Niu MY,Liu WM,Bi QL,et al. A study of Ni3Si-based composite coating fabricated by self-propagating high temperature synthesis casting route[J]. Surface and Coatings Technology,2011,205:4249-4253. |
| APA | 牛牧野,刘维民,毕秦岭,毕秦岭,&杨军.(2011).A study of Ni3Si-based composite coating fabricated by self-propagating high temperature synthesis casting route.Surface and Coatings Technology,205,4249-4253. |
| MLA | 牛牧野,et al."A study of Ni3Si-based composite coating fabricated by self-propagating high temperature synthesis casting route".Surface and Coatings Technology 205(2011):4249-4253. |
入库方式： OAI收割
来源：兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。