Combustion synthesis and characterization of bulk nanostructured Fe88Si12 alloy
文献类型：期刊论文
| 作者 | Ma JQ(马吉强) ; Yang J(杨军); Fu LC(符立才); Bi QL(毕秦岭); Liu WM(刘维民)
|
| 刊名 | IEEE Trans Nanotechnology
 |
| 出版日期 | 2010 |
| 卷号 | 9期号:2页码:218-222 |
| 关键词 | Terms—Combustion synthesis (CS) Fe88Si12 alloy nanocrystalline |
| ISSN号 | 1536-125X |
| 中文摘要 | Bulk nanocrystalline Fe88 Si12 alloy is fabricated bya combustion synthesis processing that is convenient, low in cost,and capable of being scaled up. The Fe88 Si12 alloy consists of twophases: α-Fe(Si) and Fe3 Si. It is a composite structure of mesh-work dispersed in a matrix. The meshwork is a few micrometers inength and 0.5–1 µm in diameter, and the grain size of the matrixs in the range of 5–15 nm. The nanocrystalline Fe88 Si12 alloy isyielded at 1760MPa with a large ductility of 14.6%in compressivetest. Moreover, the coercive force of the product is approximately3.6 A/m and saturation magnetization is about 196 emu/g. The re-sults suggest that the product exhibits good mechanical behaviorand soft magnet properties. |
| 学科主题 | 材料科学与物理化学 |
| 收录类别 | SCI |
| 资助信息 | the National Natural Science Foundation of China (NSFC, 50801064);the National 973 Project of China (2007CB607601);the Innovation Group Foundation from NSFC (50721062) |
| 语种 | 英语 |
| 公开日期 | 2012-09-28 |
| 源URL | [http://210.77.64.217/handle/362003/992]  |
| 专题 | 兰州化学物理研究所_固体润滑国家重点实验室 |
| 推荐引用方式 GB/T 7714 | Ma JQ,Yang J,Fu LC,et al. Combustion synthesis and characterization of bulk nanostructured Fe88Si12 alloy[J]. IEEE Trans Nanotechnology,2010,9(2):218-222. |
| APA | 马吉强,杨军,符立才,毕秦岭,&刘维民.(2010).Combustion synthesis and characterization of bulk nanostructured Fe88Si12 alloy.IEEE Trans Nanotechnology,9(2),218-222. |
| MLA | 马吉强,et al."Combustion synthesis and characterization of bulk nanostructured Fe88Si12 alloy".IEEE Trans Nanotechnology 9.2(2010):218-222. |
入库方式： OAI收割
来源：兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。