研磨对凹土形貌和流变性能研究
文献类型:会议论文
作者 | 王爱勤; 张俊平 |
出版日期 | 2010 |
会议名称 | 2010甘肃-江苏凹凸棒黏土应用学术研讨会 |
会议日期 | 2010-06-18~2010-06-20 |
会议地点 | 中国兰州 |
关键词 | 凹凸棒黏土 石磨碾磨 流变性 Attapulgite Stone grinding Rheological properties |
页码 | 20-22 |
通讯作者 | 王爱勤 |
中文摘要 | 通过石磨碾磨的方法实现了凹凸棒黏土棒晶聚集体的解离。采用场发射扫描电镜和流变仪考察了碾磨对凹凸棒黏土微观形貌和流变性能的影响。结果表明:石磨碾磨技术可促使凹凸棒黏土棒晶解离。随碾磨次数增加,凹凸棒黏土悬浮液黏度降低,流动性提高。 |
英文摘要 | The clusters of attapulgite were exfoliated using the dry grinding method. The effects of grinding on micro-morphology and rheological properties of attapulgite were investigated using field-emission scanning electron microscopy and rheometer, respectively. The results indicate that grinding is an effective method for the exfoliation of attapulgite clusters. With the increase of grinding times, the viscosity of attapulgite aqueous dispersion decreases, while the fluidity increases. |
会议主办者 | 中国科学院兰州化学物理所;淮阴工学院;盱眙凹土行业协会 |
学科主题 | 矿物学 |
语种 | 中文 |
源URL | [http://210.77.64.217/handle/362003/1342] |
专题 | 兰州化学物理研究所_环境材料与生态化学研究发展中心 |
通讯作者 | 王爱勤 |
推荐引用方式 GB/T 7714 | 王爱勤,张俊平. 研磨对凹土形貌和流变性能研究[C]. 见:2010甘肃-江苏凹凸棒黏土应用学术研讨会. 中国兰州. 2010-06-18~2010-06-20. |
入库方式: OAI收割
来源:兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。