Development of in-situ SEM torsion tester for microscale materials
文献类型:期刊论文
作者 | Chen B(陈博)2,4; Yang R(杨荣)4; Dong J1,2; Wang SF(王素芳)2,4; Wang J(王军)2,4; Huan Y(郇勇)2,3,4 |
刊名 | MEASUREMENT |
出版日期 | 2019-06-01 |
卷号 | 139页码:421-425 |
ISSN号 | 0263-2241 |
关键词 | In-situ Torsion test Micro-scale Metallic glass wire |
DOI | 10.1016/j.measurement.2019.03.034 |
英文摘要 | An in-situ SEM (scanning electron microscope) micro-torsion tester with high resolution is developed based on electromagnetism. The torque is controlled and measured using a coil-magnet component. The torsion angle is measured by a non-contact transducer based on Hall-effect. The calibration results show that the torque capacity of this tester is 1.6 x 10(-4) Nm with resolution of 1 x 10(-9) Nm. In-situ torsion test of MG (metallic glass) wire (Pd40Cu30Ni10P20) with a diameter of 111 mu m and a length of 3 mm is performed using this tester in SEM. A linear torque-torsion angle curve is obtained and the calculated shear modulus of the sample is 24.7 GPa. Meanwhile, the deformation process of the sample is simultaneously observed using SEM. It is the first time that the measurement of shear stress-strain and high resolution morphology observation are carried out simultaneously. (C) 2019 Elsevier Ltd. All rights reserved. |
分类号 | 二类 |
资助项目 | National Natural Science Foundation of China[11372323] ; National Natural Science Foundation of China[11772336] ; CAS Key Technology Talent Program ; Project of Function Development on Scientific Instruments of Chinese Academy of Sciences |
WOS研究方向 | Engineering ; Instruments & Instrumentation |
语种 | 英语 |
WOS记录号 | WOS:000464638000046 |
资助机构 | National Natural Science Foundation of China ; CAS Key Technology Talent Program ; Project of Function Development on Scientific Instruments of Chinese Academy of Sciences |
源URL | [http://dspace.imech.ac.cn/handle/311007/78708] |
专题 | 力学研究所_非线性力学国家重点实验室 |
作者单位 | 1.Chinese Acad Sci, Inst Phys, Beijing 100190, Peoples R China 2.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China; 3.Univ Chinese Acad Sci, Ctr Mat Sci & Optoelect Engn, Beijing 100049, Peoples R China; 4.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing 100190, Peoples R China; |
推荐引用方式 GB/T 7714 | Chen B,Yang R,Dong J,et al. Development of in-situ SEM torsion tester for microscale materials[J]. MEASUREMENT,2019,139:421-425. |
APA | Chen B,Yang R,Dong J,Wang SF,Wang J,&Huan Y.(2019).Development of in-situ SEM torsion tester for microscale materials.MEASUREMENT,139,421-425. |
MLA | Chen B,et al."Development of in-situ SEM torsion tester for microscale materials".MEASUREMENT 139(2019):421-425. |
入库方式: OAI收割
来源:力学研究所
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。