Study on the corrosion resistance and wear resistance of micro-arc oxidation coatings on the clad plate of aluminum and magnesium alloy
文献类型：会议论文
| 作者 | Duan HP(段红平); Duan HP(段红平) ; Duan HP(段红平); Duan HP(段红平); Duan HP(段红平)
|
| 出版日期 | 2011 |
| 会议名称 | 2nd International Conference on Manufacturing Science and Engineering, ICMSE 2011 |
| 会议日期 | APR 09-11, 2011 |
| 会议地点 | Guilin, China |
| 通讯作者邮箱 | jrl014014@163.com |
| 关键词 | Alloys Aluminum Aluminum coatings Ceramic coatings Cerium alloys Cladding (coating) Corrosion resistance Explosive actuated devices Explosive bonding Explosive welding Explosives Magnesium Magnesium alloys Manufacture Oxidation Protective coatings Wear resistance Aluminium Aluminium plates Aluminum plates Corrosion and wear resistance Explosive cladding Friction-wear test MAO coatings Microarc oxidation Morphology and composition Salt Spray test SEM |
| 卷号 | 189-193 |
| 页码 | 1248-1252 |
| 通讯作者 | Jia RL |
| 中文摘要 | Aluminium plate was cladded to magnesium alloy plate by using the explosive welding. The bonding morphology and composition of the explosive cladding plate was inspected by SEM and EDS. There is a wave bonding at the interface between aluminum plate and magnesium alloy plate. Then ceramic coatings were directly prepared on the surface of aluminum and magnesium alloy by micro-arc oxidation (MAO) in the same solution and at the same time. The microstructure and composition of MAO coatings were studies by SEM and EDS. The corrosion and wear resistance of MAO coatings on the two sides of the clad plate were investigated by salt spray tests and friction-wear test. The results show that the MAO coating on the Al surface consists of Al, O and Si elements, while MAO coating on the Mg surface consists of Mg, O and Si elements. The corrosion resistance of MAO coating on the Al surface was better than that on Mg surface of the explosive clad plate. The MAO coatings both on the Al surface and on the Mg surface can obviously improve the wear resistance of substrate. |
| 收录类别 | EI |
| 合作状况 | 国内 |
| 会议网址 | http://dx.doi.org/10.4028/www.scientific.net/AMR.189-193.1248 |
| 会议录 | MANUFACTURING PROCESS TECHNOLOGY
 |
| 会议录出版者 | TRANS TECH PUBLICATIONS, P.O. BOX 1254, CLAUSTHAL-ZELLERFELD, D-38670, GERMANY |
| 语种 | 英语 |
| ISSN号 | 1022-6680 |
| ISBN号 | 978-3-03785-031-2 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/46838]  |
| 专题 | 力学研究所_先进制造工艺力学重点实验室 |
| 推荐引用方式 GB/T 7714 | Duan HP,Duan HP,Duan HP,et al. Study on the corrosion resistance and wear resistance of micro-arc oxidation coatings on the clad plate of aluminum and magnesium alloy[C]. 见:2nd International Conference on Manufacturing Science and Engineering, ICMSE 2011. Guilin, China. APR 09-11, 2011.http://dx.doi.org/10.4028/www.scientific.net/AMR.189-193.1248. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。