Theoretical and engineering research on the municipal solid waste plasma gasification
文献类型：会议论文
| 作者 | Sheng HZ(盛宏至) ; Deng J(邓晶); Li YJ(李要建); Xu YX(徐永香); Sheng HZ(盛宏至)
|
| 出版日期 | 2011 |
| 会议名称 | International Conference on Thermal Treatment Technologies and Hazardous Waste Combustors 2011 |
| 会议日期 | MAY 10-13, 2011 |
| 会议地点 | Jacksonville, FL, United states |
| 关键词 | Atmospheric pressure Calorific value Combustion Combustors Conceptual design Energy conversion Gas engines Gasification Hazardous materials Heat treatment Hydrochloric acid Organic pollutants Plasma applications Plasmas Radioactive waste disposal Synthesis gas Waste disposal Waste treatment Cooling process Dew points Energy recovery Engine generator Environmentally-friendly technology HCl gas High temperature Hot syngas Kitchen garbage Lower heating value MSW Plasma gasification Plasma reactors Pre-processing Pretreatment systems Reaction temperature Reactor Reactor chamber Syn-gas |
| 页码 | 279-288 |
| 通讯作者 | 盛宏至 |
| 中文摘要 | Plasma gasification is an advanced and environmentally friendly technology for the disposal of municipal solid waste (MSW) with energy recovery. Based on the requirement for the treatment of MSW in Beijing, the conceptual design for a 50 t/d demo plasma gasification system for preprocessed MSW has been done. The raw MSW is preprocessed by a pretreatment system, where the raw MSW is heated up to 180°C under 0.7 MPa by steam, and then released rapidly into the vessel under atmospheric pressure. After pre-processing, kitchen garbage and dust can be easily screened out from raw MSW The moisture of sorted MSW can be reduced to 30% and a lower heating value (LHV) of the pre-processed MSW can reach 13 000 kJ/kg. The pre-processed MSW is gasified in the plasma reactor, where the plasma torches of 600 kW in total are used, in order to produce the syngas to feed a gas engine generator of 2.5MW. 30% of stoichiometrical air was fed into the reactor to get better syngas. The reaction temperature is kept at 1000°C for 5 seconds in the reactor chamber, where the dioxins can be fully destroyed. The syngas is cleaned before it is feed in to the engine. A special syngas-water heat exchanger is designed to recover energy of the hot syngas and to avoid corrosion of HCl gas under high temperature and of hydrochloric acid below the dew point. Meanwhile, dioxins formation is prevented, since the cooling process duration of syngas is shorter than 0.5 second under 200°C to 500°C. |
| 收录类别 | EI |
| 产权排序 | 1 Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China |
| 会议录 | AIR AND WASTE MANAGEMENT ASSOCIATION - INTERNATIONAL CONFERENCE ON THERMAL TREATMENT TECHNOLOGIES AND HAZARDOUS WASTE COMBUSTORS 2011
 |
| 会议录出版者 | AIR AND WASTE MANAGEMENT ASSOCIATION, 420 FT. DUQUESNE BLVD., PITTSBURGH, PA 15222, UNITED STATES |
| 语种 | 英语 |
| ISBN号 | 9781617829536 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/46829]  |
| 专题 | 力学研究所_等离子体与燃烧中心(2009-2011) |
| 通讯作者 | Sheng HZ(盛宏至) |
| 推荐引用方式 GB/T 7714 | Sheng HZ,Deng J,Li YJ,et al. Theoretical and engineering research on the municipal solid waste plasma gasification[C]. 见:International Conference on Thermal Treatment Technologies and Hazardous Waste Combustors 2011. Jacksonville, FL, United states. MAY 10-13, 2011. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。