Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy
文献类型:期刊论文
作者 | B. Q. Shi ; R. S. Chen ; W. Ke |
刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
![]() |
出版日期 | 2012 |
卷号 | 546页码:323-327 |
关键词 | High strength Magnesium alloy Texture control ECAE (equal channel angular extrusion) Forging mechanical-properties grain-size mg alloys temperature |
ISSN号 | 0921-5093 |
中文摘要 | AZ80 cast magnesium alloy has been fabricated by a combination of ECAE (equal channel angular extrusion) and subsequent forging processing to investigate the effect of second forging processing on the evolution of microstructure, texture and tensile properties. The AZ80 alloy produced by this process exhibited the ultimate tensile strength (UTS) of 434 MPa, yield strength (VS) of 347 MPa, and elongation-to-failure of 6%. The observed high strength in this sample has been ascribed to the effect of grain refinement and the formation of sharp basal texture by the subsequent forging processing. The contribution of second-phase particles to the mechanical properties was also discussed in this paper. (C) 2012 Elsevier B.V. All rights reserved. |
原文出处 | |
公开日期 | 2013-02-05 |
源URL | [http://ir.imr.ac.cn/handle/321006/60221] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | B. Q. Shi,R. S. Chen,W. Ke. Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2012,546:323-327. |
APA | B. Q. Shi,R. S. Chen,&W. Ke.(2012).Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,546,323-327. |
MLA | B. Q. Shi,et al."Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 546(2012):323-327. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。