中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Microstructures, strengthening mechanisms and fracture behavior of Cu-Ag alloys processed by high-pressure torsion

文献类型:期刊论文

作者Y. Z. Tian ; J. J. Li ; P. Zhang ; S. D. Wu ; Z. F. Zhang ; M. Kawasaki ; T. G. Langdon
刊名Acta Materialia
出版日期2012
卷号60期号:1页码:269-281
ISSN号1359-6454
关键词Eutectic Cu-Ag alloy High-pressure torsion Microstructure Hardness Fracture severe plastic-deformation bulk metallic-glass grain-refinement shear fracture composites evolution wires nucleation
中文摘要Disks of a eutectic Cu-Ag alloy were processed by high-pressure torsion (HPT) up to 20 revolutions to reveal the microstructural evolution and mechanical properties. Both the Cu and Ag phases were thinned continuously with increasing numbers of revolutions. After 20 revolutions, the alternating Cu and Ag phases were significantly refined and became fibrous with dimensions as thin as 5 nm. The strain hardening behavior of the Cu-Ag alloy was characterized after different numbers of HPT revolutions, and a saturation microhardness was attained. It is shown that the tensile fracture mode changed from necking to fully brittle shearing with increasing numbers of revolutions, and some shear offsets with sizes of similar to 5-20 mu m were observed on the fracture surfaces. Based on the abnormal saturation microhardness value of the eutectic alloy, the strengthening mechanisms of various Cu-Ag alloys are discussed. (C) 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
原文出处://WOS:000297822300027
公开日期2013-02-05
源URL[http://ir.imr.ac.cn/handle/321006/60269]  
专题金属研究所_中国科学院金属研究所
推荐引用方式
GB/T 7714
Y. Z. Tian,J. J. Li,P. Zhang,et al. Microstructures, strengthening mechanisms and fracture behavior of Cu-Ag alloys processed by high-pressure torsion[J]. Acta Materialia,2012,60(1):269-281.
APA Y. Z. Tian.,J. J. Li.,P. Zhang.,S. D. Wu.,Z. F. Zhang.,...&T. G. Langdon.(2012).Microstructures, strengthening mechanisms and fracture behavior of Cu-Ag alloys processed by high-pressure torsion.Acta Materialia,60(1),269-281.
MLA Y. Z. Tian,et al."Microstructures, strengthening mechanisms and fracture behavior of Cu-Ag alloys processed by high-pressure torsion".Acta Materialia 60.1(2012):269-281.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。