Correlation between strain-rate-related mechanical properties of Zr-based metallic glass and casting temperature
文献类型:期刊论文
作者 | Y. F. Xue ; L. Wang ; X. W. Cheng ; F. C. Wang ; H. N. Cai ; H. W. Cheng ; H. F. Zhang ; A. M. Wang |
刊名 | Journal of Materials Research
![]() |
出版日期 | 2012 |
卷号 | 27期号:4页码:701-708 |
关键词 | medium-range order compressive behavior amorphous-alloys atomic packing shear bands deformation plasticity dependence ductility strength |
ISSN号 | 0884-2914 |
中文摘要 | The Zr65Al7.5Ni10Cu17.5 bulk metallic glasses were prepared by injection casting (casting temperature of 1100 degrees C) and in situ suction casting ( casting temperature as high as 3000 degrees C). The strain-rate-dependent mechanical behaviors of the specimens were investigated under axial compression at room temperature over a wide strain rate range (1.6 x 10(-5)-1.6 x 10(-1) s(-1)). The specimens prepared by injection casting exhibited negative strain rate sensitivity, i.e., the yield stress decreased with increasing strain rate. In contrast, no strain rate sensitivity was observed for the specimens prepared by in situ suction casting. The different strain rate sensitivities in the specimens prepared at different temperatures were probably caused by the diversities of the local atomic structures. |
原文出处 | |
公开日期 | 2013-02-05 |
源URL | [http://ir.imr.ac.cn/handle/321006/60379] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Y. F. Xue,L. Wang,X. W. Cheng,et al. Correlation between strain-rate-related mechanical properties of Zr-based metallic glass and casting temperature[J]. Journal of Materials Research,2012,27(4):701-708. |
APA | Y. F. Xue.,L. Wang.,X. W. Cheng.,F. C. Wang.,H. N. Cai.,...&A. M. Wang.(2012).Correlation between strain-rate-related mechanical properties of Zr-based metallic glass and casting temperature.Journal of Materials Research,27(4),701-708. |
MLA | Y. F. Xue,et al."Correlation between strain-rate-related mechanical properties of Zr-based metallic glass and casting temperature".Journal of Materials Research 27.4(2012):701-708. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。