Formation of Ti2AlN phase after post-heat treatment of Ti-Al-N films deposited by pulsed magnetron sputtering
文献类型:期刊论文
作者 | Y. Yang ; M. Keunecke ; C. Stein ; L. J. Gao ; J. Gong ; X. Jiang ; K. Bewilogua ; C. Sun |
刊名 | Surface & Coatings Technology
![]() |
出版日期 | 2012 |
卷号 | 206期号:10页码:2661-2666 |
关键词 | Magnetron sputtering Heat treatment Microstructure Ti2AlN phase Ti-Al-N films thin-films m(n+1)ax(n) phases corrosion ti3sic2 growth cr2alc |
ISSN号 | 0257-8972 |
中文摘要 | Ti-Al-N films with different compositions were prepared by varying the nitrogen flow rate using pulsed magnetron sputtering and subsequently annealed in air at 700 degrees C. The microstructure and microhardness of the films were investigated before and after heat treatment. The XRD results indicate that no Ti2AlN MAX phase occurs in all the as-deposited films. Ti2AlN phases could be acquired only after annealing via solid state reaction. The formation condition of Ti2AlN phase is strongly dependent on the film composition. It has been found that the nitrogen concentration in the films plays a key role for the phase formation, and the critical value is in the range of 22.5-29.6 at.%. The fractured cross-section SEM images show that all the as-deposited films exhibit a fine columnar morphology. The annealed films with Ti2AlN phase components change the morphology from columnar to fine equiaxed polycrystalline. In addition, the microhardness of the films containing Ti2AlN phase is also explored, which is within the range of 18-24 GPa. (C) 2011 Elsevier B.V. All rights reserved. |
原文出处 | |
公开日期 | 2013-02-05 |
源URL | [http://ir.imr.ac.cn/handle/321006/60400] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Y. Yang,M. Keunecke,C. Stein,et al. Formation of Ti2AlN phase after post-heat treatment of Ti-Al-N films deposited by pulsed magnetron sputtering[J]. Surface & Coatings Technology,2012,206(10):2661-2666. |
APA | Y. Yang.,M. Keunecke.,C. Stein.,L. J. Gao.,J. Gong.,...&C. Sun.(2012).Formation of Ti2AlN phase after post-heat treatment of Ti-Al-N films deposited by pulsed magnetron sputtering.Surface & Coatings Technology,206(10),2661-2666. |
MLA | Y. Yang,et al."Formation of Ti2AlN phase after post-heat treatment of Ti-Al-N films deposited by pulsed magnetron sputtering".Surface & Coatings Technology 206.10(2012):2661-2666. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。