Impurity Effect on Wear Resistance of Ultrafine-Grained Copper
文献类型:期刊论文
作者 | B. Yao ; Z. Han ; K. Lu |
刊名 | Journal of Materials Science & Technology
![]() |
出版日期 | 2012 |
卷号 | 28期号:6页码:481-487 |
关键词 | Ultrafine grained copper Wear resistance Impurity Subsurface microstructure Dynamic recrystallization dynamic plastic-deformation friction growth behavior steel size al aluminum surface metals |
ISSN号 | 1005-0302 |
中文摘要 | The wear properties of ultrafine-grained (UFG) Cu samples of different purities were investigated in comparison with the coarse-grained (CG) Cu. The UFG Cu samples, prepared by means of plastic deformation via quasi-static compression, exhibit an enhanced wear resistance relative to the CG Cu samples. For both the UFG and the CG Cu samples, wear volumes increase at higher purities. A steady state worn subsurface structure was formed in each sample after sliding for 60 min, consisting of a heavily deformed nanostructured mixing layer (NML) on top of a continuous dynamic recrystallization (DRX) layer. A pronounced correlation is identified that wear volume increases monotonically with an increasing grain size of the DRX layer. The impurity level of the Cu samples has an obvious influence on the DRX grain sizes, which in turn determines the wear resistance of the Cu samples. |
原文出处 | |
公开日期 | 2013-02-05 |
源URL | [http://ir.imr.ac.cn/handle/321006/60411] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | B. Yao,Z. Han,K. Lu. Impurity Effect on Wear Resistance of Ultrafine-Grained Copper[J]. Journal of Materials Science & Technology,2012,28(6):481-487. |
APA | B. Yao,Z. Han,&K. Lu.(2012).Impurity Effect on Wear Resistance of Ultrafine-Grained Copper.Journal of Materials Science & Technology,28(6),481-487. |
MLA | B. Yao,et al."Impurity Effect on Wear Resistance of Ultrafine-Grained Copper".Journal of Materials Science & Technology 28.6(2012):481-487. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。