中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Prediction of post-dynamic austenite-to-ferrite transformation and reverse transformation in a low-carbon steel by cellular automaton modeling

文献类型:期刊论文

作者C. W. Zheng ; D. Raabe ; D. Z. Li
刊名Acta Materialia
出版日期2012
卷号60期号:12页码:4768-4779
关键词Strain-induced transformation Post-dynamic transformation Cellular automaton Modeling Low-carbon steel strain-induced transformation deformation-induced ferrite ultrafine-grained steels c-mn steel phase-transformation mechanical-properties microalloyed steel microstructure simulation alloys
ISSN号1359-6454
中文摘要The post-dynamic transformation that takes place during the subsequent isothermal holding for the case when dynamic strain-induced transformation (DSIT) from austenite to ferrite occurs during hot deformation is investigated by cellular automaton modeling. The simulation provides a better understanding of carbon diffusion in retained austenite and the resulting microstructure evolution during the post-dynamic transformation. The predictions reveal that continuing transformation from retained austenite to ferrite and the reverse transformation can occur simultaneously in the same microstructure during post-deformation isothermal holding owing to the locally acting chemical equilibrium conditions. Competition between forward and reverse transformation exists during the early stage of post-dynamic heat treatment. It is also revealed that increasing the final strain of DSIT might promote the reverse transformation, whereas the continuous austenite-to-ferrite transformation yields a diminishing effect. The influence of the DSIT final strain on the grain size of ferrite and the characteristics of the resultant microstructure is also discussed. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
原文出处://WOS:000307415200011
公开日期2013-02-05
源URL[http://ir.imr.ac.cn/handle/321006/60497]  
专题金属研究所_中国科学院金属研究所
推荐引用方式
GB/T 7714
C. W. Zheng,D. Raabe,D. Z. Li. Prediction of post-dynamic austenite-to-ferrite transformation and reverse transformation in a low-carbon steel by cellular automaton modeling[J]. Acta Materialia,2012,60(12):4768-4779.
APA C. W. Zheng,D. Raabe,&D. Z. Li.(2012).Prediction of post-dynamic austenite-to-ferrite transformation and reverse transformation in a low-carbon steel by cellular automaton modeling.Acta Materialia,60(12),4768-4779.
MLA C. W. Zheng,et al."Prediction of post-dynamic austenite-to-ferrite transformation and reverse transformation in a low-carbon steel by cellular automaton modeling".Acta Materialia 60.12(2012):4768-4779.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。