Layered Metal Phosphonate Reinforced Poly(L-lactide) Composites with a Highly Enhanced Crystallization Rate
文献类型：期刊论文
| 作者 | Pan PJ(潘鹏举) ; Liang ZC(梁子超) ; Cao AM(曹阿民) ; 井上义夫 |
| 刊名 | ACS Appl. Mater. Interfaces
 |
| 出版日期 | 2009 |
| 卷号 | 1期号:2页码:402-411 |
| ISSN号 | 1944-8244 |
| 其他题名 | 具有高度增强结晶速率的层状磷酸盐夹层的聚乳酸复合材料 |
| 通讯作者 | 井上义夫 |
| 英文摘要 | Layer phosphonate zinc phenylphosphonate (PPZn) reinforced poly(L-lactide) (PLLA) composites were fabricated by a melt mixing technique. The nonisothermal and isothermal crystallization, melting behavior, spherulite morphology crystalline structure and static and dynamic mechanical properties of the PLLA/PPZn composites were investigated. PPZn shows excellent nucleating effects on PLLA crystallization. With incorporation of 0.02% PPZn. PLLA can finish crystallization under cooling at 10 degrees C/min. The crystallization half times of a PLLA/PPZn composite decrease from 28.0 to 0.33 min at 130 degrees C and from 60.2 to 1.4 min at 140 degrees C, compared to the neat PLLA. With the presence of PPZn, the nuclei number of PLLA increases and the spherulite size reduces significantly. Through analysis of the crystal structures of PLLA and PPZn, it was proposed that the nucleation mechanism of the PLLA/PPZn system is epitaxial nucleation. The incorporation of PPZn has no discernible effect on the crystalline structure of plla. Moreover PPZn has good reinforcement effects on the plla matrix. The tensile strength of the composites is enhanced with the addition of a relatively small amount of PPZn (<5%). The tensile and storage moduli of composites increase with increasing PPZn loadings, and they respectively improve by 28% and 34% with the incorporation of a 15% PPZn filler as compared to the neat PLLA. |
| 学科主题 | 高分子化学 |
| 收录类别 | SCI |
| 原文出处 | http://dx.doi.org/10.1021/am800106f |
| 语种 | 英语 |
| WOS记录号 | WOS:000267535700028 |
| 公开日期 | 2013-03-07 |
| 源URL | [http://202.127.28.38/handle/331003/22944]  |
| 专题 | 上海有机化学研究所_高分子材料研究室 |
| 推荐引用方式 GB/T 7714 | Pan PJ,Liang ZC,Cao AM,et al. Layered Metal Phosphonate Reinforced Poly(L-lactide) Composites with a Highly Enhanced Crystallization Rate[J]. ACS Appl. Mater. Interfaces,2009,1(2):402-411. |
| APA | 潘鹏举,梁子超,曹阿民,&井上义夫.(2009).Layered Metal Phosphonate Reinforced Poly(L-lactide) Composites with a Highly Enhanced Crystallization Rate.ACS Appl. Mater. Interfaces,1(2),402-411. |
| MLA | 潘鹏举,et al."Layered Metal Phosphonate Reinforced Poly(L-lactide) Composites with a Highly Enhanced Crystallization Rate".ACS Appl. Mater. Interfaces 1.2(2009):402-411. |
入库方式： OAI收割
来源：上海有机化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。