中国科学院机构知识库网格系统: Design of transmission of high-speed CCD driving signals (EI CONFERENCE)

中国科学院机构知识库网格

Chinese Academy of Sciences Institutional Repositories Grid

Design of transmission of high-speed CCD driving signals (EI CONFERENCE)

文献类型：会议论文


作者	Zhang S.
出版日期	2011
会议名称	2011 International Conference on Mechatronic Science, Electric Engineering and Computer, MEC 2011, August 19, 2011 - August 22, 2011
会议地点	Jilin, China
关键词	In order to overcome the distortion problem of CCD driving signals caused by signal transmission the detail implementation of transmission of high-speed CCD driving signals based on transmission line theory is discussed. The CCD driving signals are critical to the CCD to produce high quality images. In high speed application these drivers will occupy more circuit board areas and can not be put very close to the CCD. So the driving signals must be transmitted. Because the CCD exhibits capacitive load the driving signals distortion problem is much severe. Transmission line theory is used to analyze the problem. The method of source termination is adopted to avoid signal reflections. Meanwhile the characteristic impedance of the circuit board and the resistance of terminal resistor are designed small enough to decrease the rising and falling time of the driving signals. Experimental results show that there is no distortion of the high speed driving signals after transmission. 2011 IEEE.
页码	1382-1385
收录类别	EI
源URL	[http://ir.ciomp.ac.cn/handle/181722/33007]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式 GB/T 7714	Zhang S.. Design of transmission of high-speed CCD driving signals (EI CONFERENCE)[C]. 见:2011 International Conference on Mechatronic Science, Electric Engineering and Computer, MEC 2011, August 19, 2011 - August 22, 2011. Jilin, China.

入库方式： OAI收割

来源：长春光学精密机械与物理研究所

浏览0

下载0

收藏0

其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。