中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
A design on a control method of a new type of focal plane shutter (EI CONFERENCE)

文献类型:会议论文

作者Xue L. ; Ming L. ; Zheng L.-N. ; Zhou J.-F. ; Zhang H.-W. ; Zhang J.-C.
出版日期2010
会议名称2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering, CMCE 2010, August 24, 2010 - August 26, 2010
会议地点Changchun, China
关键词In order to ensure appropriate exposure time and no exposure while electric charge is transferring after taking a photograph it is necessary to have the shutter mechanism cooperate with CCD for area CCD aerial cameras. The ground object illumination has a wide range which is from 4000Lx to 100000Lx so a shutter which is high efficient and a continuous stepless adjustment are also required. This paper introduces the fundamental principle structural design and control procedure about this new focal plane shutter. Under the control of DSP the velocity of shutter curtain governed by the shutter motor can be not only precisely controlled but also the durability and the reliability are increased. The experiment results have shown that this new shutter has the higher stability of movement long life span with more than 105 operating times a wide range of exposure time from1/ 50s to 1/ 320s(depending on the slit width)and the exposure error is less than 10%. With the CCD gain adjustment the performance of this shutter is fully satisfied with the requirements of area CCD aerial cameras. 2010 IEEE.
页码293-296
收录类别EI
源URL[http://ir.ciomp.ac.cn/handle/181722/33237]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714
Xue L.,Ming L.,Zheng L.-N.,et al. A design on a control method of a new type of focal plane shutter (EI CONFERENCE)[C]. 见:2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering, CMCE 2010, August 24, 2010 - August 26, 2010. Changchun, China.

入库方式: OAI收割

来源:长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。