中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Design and analysis of power system of micro-electromechanical actuator (EI CONFERENCE)

文献类型:会议论文

作者Zhang J.; Zhang J.; Zhang J.
出版日期2010
会议名称2010 2nd International Conference on Industrial Mechatronics and Automation, ICIMA 2010, May 30, 2010 - May 31, 2010
会议地点Wuhan, China
关键词In order to apply the electromechanical actuator to tactical mini-missiles maximum rotational speed of output shafts is greater than 250/s. Test results basically correspond to the requirement of technical indexes. It is proved that this analysis and design method is congruent with the design of micro-electromechanical actuators this paper researches on the key technology such as load-bearing ability the system bandwidth can reach 25.3Hz on the condition of no load and 23.4Hz on the condition of load thus the method is feasible. 2010 IEEE. rapidity and miniaturization of the micro-electromechanical actuator power system based on the ball screw. First according to specific technical indexes the power electromechanical time constant and the size of the motors are screened originally through theoretical analysis. Finally based on the characteristics of ball screw transmission load locus of the micro-electromechanical actuator dynamic system is theoretically analyzed and the optimum speed ratio is determined through parameter optimization. The results of the double closed loop controlled test on the principle prototype show: the system can operate normally with 2.5N.m hinge moment
页码298-302
收录类别EI
源URL[http://ir.ciomp.ac.cn/handle/181722/33241]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714
Zhang J.,Zhang J.,Zhang J.. Design and analysis of power system of micro-electromechanical actuator (EI CONFERENCE)[C]. 见:2010 2nd International Conference on Industrial Mechatronics and Automation, ICIMA 2010, May 30, 2010 - May 31, 2010. Wuhan, China.

入库方式: OAI收割

来源:长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。