中国科学院机构知识库网格系统: Finite element model and analysis for micro-cutting of aluminum alloy 7050-T7451 (EI CONFERENCE)

中国科学院机构知识库网格

Chinese Academy of Sciences Institutional Repositories Grid

Finite element model and analysis for micro-cutting of aluminum alloy 7050-T7451 (EI CONFERENCE)

文献类型：会议论文


作者	Zhou J.; Wang F.; Wang F.
出版日期	2012
会议名称	2012 International Conference on Machine Design and Manufacturing Engineering, ICMDME 2012, May 11, 2012 - May 12, 2012
会议地点	Jeju Island, Korea, Republic of
关键词	In this paper a finite element model with respect to actual state of micro-cutting is established by adopting software of ABAQUS/Explicit. Based on the FE model the cutting force and specific cutting force with various uncut depth of cut with different cutting edge radius are compared and then analyzed with regard to this simulation. In micro-cutting the nonlinear scaling phenomenon is more evident with the decreasing of uncut chip thickness. The likely explanations for the size effect in small uncut chip thickness are discussed in this paper. (2012) Trans Tech Publications Switzerland.
页码	650-653
收录类别	EI
源URL	[http://ir.ciomp.ac.cn/handle/181722/33503]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式 GB/T 7714	Zhou J.,Wang F.,Wang F.. Finite element model and analysis for micro-cutting of aluminum alloy 7050-T7451 (EI CONFERENCE)[C]. 见:2012 International Conference on Machine Design and Manufacturing Engineering, ICMDME 2012, May 11, 2012 - May 12, 2012. Jeju Island, Korea, Republic of.

入库方式： OAI收割

来源：长春光学精密机械与物理研究所

浏览0

下载0

收藏0

其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。