中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 长春光学精密机械与物理研究所
  3. 中国科学院长春光学精密机械与物理研究所
  4. 中科院长春光机所知识产出
  5. 会议论文
An engineering analysis and research on center frame structure using casting of vehicle radar antenna pedestal (EI CONFERENCE)

文献类型：会议论文

作者Li Y.; Liu W.; Li Y.; Li Y.; Li Y.
出版日期2012
会议名称2012 International Conference on Industrial Design and Mechanical Power, ICIDMP 2012, July 10, 2012 - July 11, 2012
会议地点Huangshan, China
关键词According to the usage of vehicle radar antenna pedestal center frame this article analyzes and compares the structure characteristic of welding and casting. We decide to adopt the casting structure and use special casting material ductile iron QT450-10. And we describe the casting material ductile iron QT450-10. Based on the center frame of using conditions we analyze the deformation and stress of center frame by the finite element analysis software. The design is in line with the material allowable requirements and to meet the requirements of the system stiffness. (2012) Trans Tech Publications Switzerland.
页码7-10
收录类别EI
源URL[http://ir.ciomp.ac.cn/handle/181722/33518]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714		 Li Y.,Liu W.,Li Y.,et al. An engineering analysis and research on center frame structure using casting of vehicle radar antenna pedestal (EI CONFERENCE)[C]. 见:2012 International Conference on Industrial Design and Mechanical Power, ICIDMP 2012, July 10, 2012 - July 11, 2012. Huangshan, China.

入库方式： OAI收割

来源：长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。