中国科学院机构知识库网格系统: Structural design of large aperture rectangular mirror for space telescope (EI CONFERENCE)

中国科学院机构知识库网格

Chinese Academy of Sciences Institutional Repositories Grid

Structural design of large aperture rectangular mirror for space telescope (EI CONFERENCE)

文献类型：会议论文


作者	Li Z.; Li Z.
出版日期	2013
会议名称	2nd International Conference on Civil Engineering and Transportation, ICCET 2012, October 27, 2012 - October 28, 2012
会议地点	Guilin, China
关键词	Structural design of large aperture mirror is one of the key technologies for space telescope development. To meet the requirements of high stiffness strength and thermal dimensional stability some factors such as support scheme materials selection lightweight design and flexible support design were taken into account. The three supports location of the mirror was determined according to the modal analytical solution. By adjusting the parameters of flexure hinge influences of gravity assembly stress and thermal stress on the mirror were reduced obviously. Finite element analysis (FEA) results indicate that the surface accuracy reach to rms10.2nm and 10.8nm under the gravity along optical axis direction and 5C uniform temperature rise respectively the fundamental frequency of the mirror component is 268Hz. Dynamics test shows that the first order natural frequency is 256Hz which shows an error less than 5% compared to FEA results. (2013) Trans Tech Publications Switzerland.
页码	855-858
收录类别	EI
源URL	[http://ir.ciomp.ac.cn/handle/181722/33557]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式 GB/T 7714	Li Z.,Li Z.. Structural design of large aperture rectangular mirror for space telescope (EI CONFERENCE)[C]. 见:2nd International Conference on Civil Engineering and Transportation, ICCET 2012, October 27, 2012 - October 28, 2012. Guilin, China.

入库方式： OAI收割

来源：长春光学精密机械与物理研究所

浏览0

下载0

收藏0

其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。