中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Optimization and design of the bottom support of the primary mirror chamber in the opto-electronic device (EI CONFERENCE)

文献类型:会议论文

作者Zhang G.; Zhang G.; Zhang G.
出版日期2011
会议名称2011 International Conference on Transportation, Mechanical, and Electrical Engineering, TMEE 2011, December 16, 2011 - December 18, 2011
会议地点Changchun, China
关键词In the large-diameter opto-electronic device tracking equipment by full analyzing the support structure of the primary mirror the primary mirror usually uses the combination of the bottom support and the lateral support. Because both the bottom support and the lateral support are installed on the primary mirror chamber's base plate after changing the welded structure of the primary mirror chamber structure to the cast structure and improving the stiffness of the primary mirror base plate the stiffness of the base plate will show in the amount of sloshing of the primary mirror relative to the primary mirror chamber and therefore influences the tracking accuracy of the opto-electronic device. During the assembling and adjusting of the primary mirror in the actual process of working on the project the amount of sloshing of the primary mirror is reduced significantly. The results show that in working on the primary mirror support as is found that the amount of sloshing of the primary mirror relative to the primary mirror chamber is comparatively large the forms and structure stiffness of bottom support and lateral support should be considered together with that the stiffness of the primary mirror chamber acting as the basis is playing the crucial role. 2011 IEEE.
页码942-944
收录类别EI
源URL[http://ir.ciomp.ac.cn/handle/181722/33582]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714
Zhang G.,Zhang G.,Zhang G.. Optimization and design of the bottom support of the primary mirror chamber in the opto-electronic device (EI CONFERENCE)[C]. 见:2011 International Conference on Transportation, Mechanical, and Electrical Engineering, TMEE 2011, December 16, 2011 - December 18, 2011. Changchun, China.

入库方式: OAI收割

来源:长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。