中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Grating interferometry method for torsion measurement (EI CONFERENCE)

文献类型:会议论文

作者Liu W.
出版日期2006
会议名称ICO20: Optical Information Processing, August 21, 2005 - August 26, 2005
会议地点Changchun, China
关键词Method of grating interferometry was presented for torsion angle measurement moire fringe generated by two gratings is used in a new field it breaks through moire fringe's routine application. Measurement principle is described torsion angle can be gotten by the tilt angle or the width of moire fringe. Different from moire fringe's characteristic information extracting methods in traditional measurement fields fringe-tilt method and fringe-width method were put forward to extract moire fringe's characteristic information. Fringe-tilt method is on the basis of moire fringe's tilt to acquire torsion angle uniform formula was built aiming at all positions of two gratings in the coordinates fringe-width method is on the basis of moire fringe's width to acquire torsion angle three key problems are given about fringe-width method. Thick middle and thin moire fringe were collected in experiments and processed by two methods fringe-width method's result shows that magnitude of boat torsion error is satisfied with that of theoretical precision analysis and the change rule of torsion error is also same to that of theoretical analysis the thicker fringe is the higher precision is when fringe width arrives to be 1695m the precision is 1.7" the thinner fringe is the lower precision is when fringe width arrives to be 734.7m the precision is 6.7". In addition to these the results of repeatability experiments sensibility experiments are given. In a word the measurement principle is right and the precision of fringe processing is also reliable.
收录类别EI
源URL[http://ir.ciomp.ac.cn/handle/181722/33638]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714
Liu W.. Grating interferometry method for torsion measurement (EI CONFERENCE)[C]. 见:ICO20: Optical Information Processing, August 21, 2005 - August 26, 2005. Changchun, China.

入库方式: OAI收割

来源:长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。