中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 长春光学精密机械与物理研究所
  3. 中国科学院长春光学精密机械与物理研究所
  4. 中科院长春光机所知识产出
  5. 会议论文
Design and implementation of high-speed digital CMOS camera driving control timing and data interface (EI CONFERENCE)

文献类型：会议论文

作者Wang Y.; Wang Y.; Wang Y.; Sun H.; Sun H.; Wang Y.; Wang Y.
出版日期2006
会议名称Sixth International Symposium on Instrumentation and Control Technology: Sensors, Automatic Measurement, Control and Computer Simulation, October 13, 2006 - October 15, 2006
会议地点Beijing, China
关键词High-speed digital cameras are progressing rapidly with the development of CMOS image sensor in these few years. In order to develop a high-speed CMOS industrial digital camera the CMOS image sensor MI-MV13 is used. The sensor drive pulse and control timing based on Xilinx Virtex-II Pro FPGA is designed. A novel format of digital image transporting based on Camera Link data port is defined in this paper. It is implemented 1280 (H) 1024 (V) SXGA resolution digital image transported at a high frame rate of 300 fps (frames-per-second) with 5 Pixels 10 bit compatible Camera Link Medium Configuration. In addition these functions that adjustments of exposure beginning time integral time AOI (Area of Interest) output and so on are realized in a FPGA chip. All of the function modules are embedded in a SOPC (System on a Programmable Chip) and further functions can be easily added to the chip at the second time development. Experimental results show that the design of driving control timing and data interface in FPGA is suitable for high-frame rate low power intelligent and miniaturization digital video camera.
收录类别EI
源URL[http://ir.ciomp.ac.cn/handle/181722/33801]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714		 Wang Y.,Wang Y.,Wang Y.,et al. Design and implementation of high-speed digital CMOS camera driving control timing and data interface (EI CONFERENCE)[C]. 见:Sixth International Symposium on Instrumentation and Control Technology: Sensors, Automatic Measurement, Control and Computer Simulation, October 13, 2006 - October 15, 2006. Beijing, China.

入库方式： OAI收割

来源：长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。