中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 长春光学精密机械与物理研究所
  3. 中国科学院长春光学精密机械与物理研究所
  4. 中科院长春光机所知识产出
  5. 会议论文
The removal function of edge effect and amending with dwell time function (EI CONFERENCE)

文献类型：会议论文

作者Luo X.; Zhang F.; Zhang F.; Wang X.-K.; Zheng L.-G.; Deng W.-J.
出版日期2010
会议名称5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, April 26, 2010 - April 29, 2010
会议地点Dalian, China
关键词Computer Controlled Optical Surfacing (CCOS) is widely used for making optical aspheric mirrors. In the practical fabrication edge effect is an important problem which restricts the fabrication efficiency and accuracy seriously. In this paper the edge effect is solved by working out the edge removal function and compensate with dwell time function. Skin Model is used to describe the pressure distribution when the tool hangs over the work-piece. The calculation model of edge removal function is derived from Skin Model theoretically. A removal function experiment is completed. The difference between the theoretical model and the experiment results is less than 5%. It means that the calculation model is suit for the practical fabrication. Than the dwell time is solved with edge effect compensation by matrix-based algorithm. In the end actual experiment was done to validate the edge effect compensation method. 2010 Copyright SPIE - The International Society for Optical Engineering.
收录类别EI
源URL[http://ir.ciomp.ac.cn/handle/181722/33881]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714		 Luo X.,Zhang F.,Zhang F.,et al. The removal function of edge effect and amending with dwell time function (EI CONFERENCE)[C]. 见:5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, April 26, 2010 - April 29, 2010. Dalian, China.

入库方式： OAI收割

来源：长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。