The friction and wear properties of clay filled PA66
文献类型：期刊论文
| 作者 | Wang HG(王宏刚) ; Wang QH(王齐华); Wang QH(王齐华); Wang TM(王廷梅); Mu B(慕波)
|
| 刊名 | Polymer Engineering & Science
 |
| 出版日期 | 2008 |
| 卷号 | 48页码:203-209 |
| ISSN号 | 0032-3888 |
| 通讯作者 | 王齐华 |
| 中文摘要 | Polyamide 66(PA66)/clay nanocomposites were prepared by direct melt compounding. The mechanical and tribological properties were evaluated. It was found that addition of clay into PA66 increased the bending strength and microhardness of PA66. And also, the incorporation of clay can reduce the friction coefficient of PA66. The nanocomposites which have the mass fraction less than 5% show less wear rate compared with neat PA66. High fraction of clay can cause severe agglomerated abrasives. The differences in the friction and wear behaviors of PA66 and PA66/clay nanocomposites are attributed to the differences in their surface morphologies, transfer film characteristic. The agglomerated abrasives on the worn surface contribute to the increase of wear rate of nanocomposites of higher mass fraction clay. The friction and wear behaviors of PA66 and its nanocomposites under high temperature exhibit similar tendency with those under 258℃. |
| 学科主题 | 材料科学与物理化学 |
| 资助信息 | NSFC (50421502) |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000252077600025 |
| 公开日期 | 2013-03-28 |
| 源URL | [http://210.77.64.217/handle/362003/2688]  |
| 专题 | 兰州化学物理研究所_固体润滑国家重点实验室 兰州化学物理研究所_先进润滑与防护材料研究发展中心 |
| 通讯作者 | Wang QH(王齐华); Wang QH(王齐华) |
| 推荐引用方式 GB/T 7714 | Wang HG,Wang QH,Wang QH,et al. The friction and wear properties of clay filled PA66[J]. Polymer Engineering & Science,2008,48:203-209. |
| APA | 王宏刚,王齐华,王齐华,王廷梅,&慕波.(2008).The friction and wear properties of clay filled PA66.Polymer Engineering & Science,48,203-209. |
| MLA | 王宏刚,et al."The friction and wear properties of clay filled PA66".Polymer Engineering & Science 48(2008):203-209. |
入库方式： OAI收割
来源：兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。