Key technologies on YAG laser engraving ceramic anilox roll
文献类型：会议论文
| 作者 | Wang HC(王红才) ; Wang Y(王扬); Yang MJ(杨明江)
|
| 出版日期 | 2011-09 |
| 会议名称 | 2nd Annual Conference on Electrical and Control Engineering, ICECE 2011 |
| 会议日期 | SEP 16-18, 2011 |
| 会议地点 | Yichang, China |
| 通讯作者邮箱 | whongc@sina.com |
| 关键词 | Etching Light transmission Technology Ceramic anilox rolls Flexography High repetition Key technologies Laser cavity Laser engraving laser technique Laser texturing Light pulse tow-dimension controllable distribution YAG laser |
| 页码 | 221-224 |
| 通讯作者 | 王红才 |
| 中文摘要 | As the heart of Flexography, laser engraving ceramic anilox roll requires that the diameter and depth of each cell is changeable, and the distribution of cell should be 30-hexagon, 45-quadrangle or 60-hexagon. By modulating the laser cavity gain from step way to gradual chang way, the wave modulating technology of high repetition light pulse solves the problem of increasing absorbency of ceramic to YAG laser. By engraving the same cell with grouped light pulses, the technology of high repetition and grouped pulses solves the problem of engraving high depth cell. By detecting with corder and processing using alterable divider coefficient, the technology of tow-dimension controllable distribution solves the problems of orientation and distribution of each cell. These three YAG laser texturing technologies above-mentioned are the key technologies to realize YAG laser engraving ceramic anilox roll. |
| 收录类别 | EI |
| 合作状况 | 国内 |
| 产权排序 | 1 School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, China; 2 Key Laboratory of Mechanics in Advanced Manufacturing, Institute of Mechanics, Chinese Academy of Sciences, Beijing, China |
| 会议网址 | http://dx.doi.org/10.1109/ICECENG.2011.6057515 |
| 会议录 | 2011 INTERNATIONAL CONFERENCE ON ELECTRICAL AND CONTROL ENGINEERING, ICECE 2011 - PROCEEDINGS
 |
| 会议录出版者 | IEEE COMPUTER SOCIETY, 445 HOES LANE - P.O.BOX 1331, PISCATAWAY, NJ 08855-1331, UNITED STATES |
| 语种 | 中文 |
| ISBN号 | 978-1-4244-8163-7 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/47148]  |
| 专题 | 力学研究所_先进制造工艺力学重点实验室 |
| 推荐引用方式 GB/T 7714 | Wang HC,Wang Y,Yang MJ. Key technologies on YAG laser engraving ceramic anilox roll[C]. 见:2nd Annual Conference on Electrical and Control Engineering, ICECE 2011. Yichang, China. SEP 16-18, 2011.http://dx.doi.org/10.1109/ICECENG.2011.6057515. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。